Search results

Bob, Yes send some pics Thanks Walter

Found the air chuck for the tires in the vehicles kit - thanks

Installed a hardtop in better condition. Got it insured and applied for a Antique Permanent tag here in FL

The valve stems on the Mk48 tire are large - looking for a source for the proper air chuck for those large valve stems. Thanks

The gov sold 2 duces at MacDill AFB in Tampa that had lift gates.

I didnt think of the sleeping mat material - my dad might even have some laying around from an old surplus buy. The db engineering has some neat stuff too. Just spoke with my dad - BINGO he has the mats !! - we will give that a try with pics to follow. Question - suggestion for glue brand?

I need to replace the insulation in the duce hardtop I'm currently using - Does anyone have a source for a similar material?

Thats what I found too - dont own the 15kw genset though

Picked up 2 filters - told they fit the M35. Torite #8085-1 didnt see them listed for the duce. Any chance they are for the duce?

New headlight bulbs (they were missing when bought) Replaced tool box/drivers step - old units frame was bent.

Read through it - looks like it applys to all MVs - aside from the M35A2C the Mk48/14 will go this route too. Will be working on the paperwork in the AM.

I own a 1989 M35A2C - I see on the form theres a choice for military vehicles - fourth box - with the option of below A Former Military Vehicle (may choose either type plate listed below, regardless of the vehicle’s age). Would this work for the 89 vintage since its not 25 years old? Thanks

Need a set mirrors for my M35A2C - Seen 3 or 4 different types - Any suggestions on a source for 2 complete sets? Thanks

running again Finally got her running after sitting for 3 or so years.

ball valve My truck is a 1989 if that makes a difference

Yes !!!! it runs again Today was a truly good day - the engine started. We did find 2 more small problems before it started. The ball valve on the engine mounted fuel filters was stuck closed - fixed it. The 3 way fitting towards the front of the pump that has a sliding orifice arraignment -...

side cover Today my dad removed the cover and the mechanism was frozen in the off position- with alittle wiggling it came loose. Now the question - will the loosening fix the problem or do we need to dig deeper into the pump?

the pump Thanks for the info - the rod moves on the outside - have to pull the cover. I will report back...

After replacing the fuel tank/pump/filters on my 89' M35A2C (it fell pray to old gov biodiesel) we thought that it might start again (ran great when first bought). Flip the power switch - pump humms - no fuel at the injector pump. I know the pump works since it came off a running duce (engine...

pressurizing the system Thanks for the ideas - before I start tearing into the engine I need to know theres fuel at pump - it ran before so something tells me it lost its prime to the pump. Also since the priming pump doesnt seem to be working (compared to my other truck) thats first on the...