Search results

CM, welcome aboard SS, follow your training in the sand box, keep checkin in here and if at all possible hook up with DC3. He'll show you around there and on SS. Both you guys stay safe, your in our thoughts and prayers and our holiday wish is for you all to come home soon!! Merry Christmas...

After reading thru this, I can't help but think the installers may very well not have followed the instructions to the letter. Some torgued, some didn't. Some retorqued, some didn't. I torqued & retorgued when I installed mine 3 years ago and have had no problems summer or winter. I used JT's...

According to WickiLeaks, it was the 'Watermellon Dispenser' that put it over the top. :???:

Hawk, hope ya don't talk about all your pieces of tail this much...roflaua

You guys on the other side of the pond sure have ugly trucks.. rofl Has all the right bells, whistles and buzzers but it's ugly. :drool: Thanks for sharein..:mrgreen:[thumbzup]

One tip about sandpaper, always “break” the bead of the sandpaper back over an edge of your workbench. I actually do this by holding one of the corners and pulling the paper (back down, grit up) over the edge of the bench. Rotate the paper 90°, pull over the edge over the bench again and so...

The 'Gun Truck' Gathering IX will be in Louisville, Kentucky!! 3-7 August 2011 Finally the hotel negotiations are complete! We are sorry it was such a long wait for this information to be posted but working with the Visitor Center of Louisville who assisted with this process involved...

After reading this thru, I've come to the same conclusion. We sometimes over think things and cause ourselves our own problems. If you put racing oil in a Pinto engine, does it become a racing Pinto engine? I think not! Same goes for our deuce engines, trans, transfer cases and rears. They...

S-250G Shelter. 1-10. Equipment Data. Height 70.125 in (178.11 cm) W i d t h 79.0625 in (200.82 cm) Length 86.625 in (220.03 cm) Gross weight Shield 770 lb (349 kg) empty Cubage 273ft *As taken from - Shelter, Electrical Equipment TM 10-5411-205-13...

The thinner of the two levers is the transfer case and the larger is most likely for the PTO to run whatever was mounted. Saw a set up with that style stabilizer jack on an old log truck years ago. 2cents

Yer bolts are weak, yer nuts came loose and yer rods bent.. pay attention.......rofl :grd: aua :cry:

Son, after reading all this, couple things come to mind. So I'll ask you to please humor this 'Old Man' for just a minute or two here. Yep, a half a year at sea gives ya "Way too Much Time" to think things over. :rolleyes: You've already decided you have a problem, when in fact you...

X2 :ditto:

Read the manuals..... The Tech Manuals are the best place to get your questions answered. The Parts manual gives you the diagrams & part #'s. The Maint. & Tech. manuals tell you how and when to do the job with diagrams. The time spent reading these manuals is well worth it. You'll not...

Here's where to get the facts....... www.jatonkam35s.com This is the man that can and will answer all your questions and concerns about spin on oil filters for the Multifuel. His filters have been tried, tested and studied to deliver the best results possible for the Multifuel. I'm sold on...

Welcome to the wonderful world of 'OD Addiction'. Your in a great location to find others with the same affliction and tons of knowledge to help with whatever problems you encounter. That means there's two things ya need to get done rather quickly. 1st. Hook up with a local MV club and...

The date has been confirmed for the Redball Winter Swapmeet at Jim Thorpe, Pa. It will be Saturday March 5th, 2011 at the same location as years past, 0800 to 1700. Keep checking www.redballonline.org for additional info on 2011 Shows & Rallies. See ya at JT........[thumbzup]

Professor, that is one beautiful set-up you designed there. I'm workin on a 250 I recently got off Hawkman that will be made into my mobile 'Hooch'. Unlike yours, I'm stripping everything out of mine, then will build in a fold-up bed, closet, and a small cooking bench area. I've been drilling...

Give Bob Rabino a call at Mil Spec Restorations..908-475-2799.. [thumbzup]

Howdy......... Welcome aboard Jay...lots going on in the Keystone and neighboring states so keep an eye on 'Comin Events'. 1st. Saturday in March is the Jim Thorpe Swapmeet and MTA's Spring Show April 16th. & 17th to kick things off. :jumpin: