Search results

ACE, I have the starter,slave receptacle and mounting bracket already but no starter switch. I can get a switch but I'm not sure where the starter switch gets it's power and where it goes to. The small terminal on the end of the solenoid seems to be Neg. based on some continuity testing I did. I...

Does anyone have the complete instructions(including wiring diagram, etc.) for installing a starter, slave cable recpt.,starter switch and so forth on a 3KW gas generator. TM's I have only have rather vague pics. Thanks, BC

Hmmmm, must be when those lucky retired guys with all that time to spend working on their MV's get their Soc. Sec. checks :D BC

You should be able to get a gallon can of denatured alcohol at any good hardware store. Don't know how it reacts with rubber parts, but it will absorb water, which would be a good thing. You can put the rest in the fuel tank of any gas powered vehicles you have to act as gas line anti-freeze...

Matt, Don't know if this place can help you or not. If they can, I'll bet they are pricy. http://www.secamerica.com/ttinterfaces.html?gclid=CK6xrba_tZECFQMsFQodNTRZdQ BC

check this link rocco. http://www.steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=19080 BC

RE: Really the invertor to mount Bjorn, thank you. Very helpful as usual :D readyman, you are absolutely correct, that is the mother of all power strips :shock: A little more robust than I had in mind and would take up a lot of space with the radio, intercom etc. already installed in the cab...

24 volt connector Here is a pic of a 24 volt female power connector. Does anyone have one that has NSN on it or any identifiers. Would like to track down a pair or two. Thanks, BC Photo courtesy of Austin Aviation.

Okay, adding to the horn circuit sounds like a good way. Loop on another breaker and then feed an item or two depending on draw. Breakers would mount on engine side of firewall. I have a MX-7777 installedl which I could use also. Could you please post a pic or reference to what you use as a...

If any of you have several 24 volt add on accessories in your truck, could you please post up how you supplied them with power. Did you tap into existing feeds, add a dedicated terminal block with either a breaker or fuses, just keeping tapping the #10 wire(I think)or any other method. Am...

Welcome aboard! Nice truck, nice vid, nice tunes. BC

That is a test fit pic of my heater installation before I had elbows put on in place of the straight fittings to the heater core. BC

Here is another one the guy is going to chop. Looks like a polesetter. http://cgi.ebay.com/Military-diesel-Deuce-and-half-rear-ends-monster-truck_W0QQitemZ7595389460QQihZ017QQcategoryZ66927QQcmdZViewItemQQ_trksidZp1742.m153.l1262 BC

Hey fnrizzo, Can't really answer your question, but came across this the other day and posted it in Trailers I think. http://www.secamerica.com/ttinterfaces.html?gclid=CK6xrba_tZECFQMsFQodNTRZdQ BC

Hmmm.... picked up one M-37 around the 6th and may have 4 more a week later...Yup, you've got the Green Disease :D BC

Came across this clicking around. May be useful to someone. BC http://www.secamerica.com/ttinterfaces.html?gclid=CK6xrba_tZECFQMsFQodNTRZdQ

Hey jasonjc, just take all your vehicles over and park them all over the area and you'll think there is a huge crowd there :D

My outlook express has notified me that I have two new messages in my Steel Soldiers account but nothing is there. Any suggestions? BC

Well, I'm not going to read this thread anymore, it makes me sad to read all the devisive and inflamatory remarks :( BC

RE: Re: RE: Got off the pavement today! Nice tj! BC