Search results

Steve, OHT is Oil, hydraulic and tool, or something like that. Pneumatic air tool is what I use because I have it always handy for my carpentry air tools. There should be a small square headed plug on the back of the airpack where you can add a shot or two of oil to keep the air cylinder lubed...

I'm not sure. I got brand new correct dropside bow corners and also new top bows just last year. Perhaps they haven't gotten bent, twisted and settled yet so they are at the proper height. Someone may know the correct answer to your ?. BC

OK Carnac. Here's one for you. Frame Number 0525 18312 # inside door 04B56871 NSN-2320-00-077-1644 ( I think I figured out one time that # makes it a dump truck, so it may have been re data plated, as I see no indications it was ever a "Tipper") Thank you for any info, Sir :beer: BC

Hey Jay, mine measure 60 inches +/- 1/4 inch. BC :driver:

Anyone have a good condition working H-161U headset they would like to part with for a reasonable price? Thanks, BC

Allright, you convinced me, I need one :driver: BC

You are very welcome Sir :driver: BC

OK, here is more information for you. I just went and disconnected my 4 pin connector from the MX-7777 and disconnected my twisted pair from the positive terminal at the batteries. Checked continuity and found that A & B are positive. Pins are labeled on mine and I would presume on yours also...

I had one of these from Fair Radio http://www.fairradio.com/catalog.php?mode=viewitem&item=3293 or ( I can't remember) one of these http://www.fairradio.com/catalog.php?mode=viewitem&item=3274 and I decided not to use a 3 pin power connector so I just removed the bendix connector and went the...

Mark, I had the same question. Open up the suppressor and look inside. It will be very obvious which is hot and which is not. Did it a while ago but very simple in there. Hot goes through the breaker which acts as an on/off switch. Figure out which is which at the connector and wire the plug...

Is it a toggle switch or a rotating switch without a knob? I can't really tell. Does your truck have a heater? Possibly for that if it is a toggle. Someone may know, or you may have to follow the wiring and see where it goes, or, live on the edge and just turn the darn thing on and see what...

I don't know the answer, but did you look at the ends of the studs to see if they are marked? BC

Counter-clockwise should do it. Have to turn mine quite a few turns before anything happens. BC

RE: Re: RE: Re: RE: Rockwell 2.5T Front Axles... I hate hearing about all this stuff getting scrapped. How is my Grandson going to keep my Deuce going after I'm gone :cry: BC

Super, Dave :D BC

Me too :beer:

Want to let you guys know what you probably already know and that is that AMGeneral is a very straight shooter. Bought the tool trailer from him sight unseen with only verbal description and a few pics. He described it very well. As good or better than I hoped for, especially the frame and...

Work and play BC

RE: master cylinder tm Check this link for instructions. http://www.steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=8063 It gives a TM # and also an important correction for one diagram. I got a rebuild kit from White Owl but it was some time ago so don't know the availability or...

RE: USAF oil analysis When I had an oil analysis done, the service that did it was Stavely Services Fluid Analysis. When you have an analysis done there you become sort of a member and you can sign up for their eline email newsletter and tech Bulletins. The most recent one had the following...