Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Has anyone ever taken the pulley off the 200Amp generator? I try to use a breaker bar and a big crescent wrench to take it off but this thing is literally just frozen. Has anyone else ever taken this pulley off?
What I was trying, was putting my breaker bar in the back and then try to use my...
I haven't started yet to diagnose this, but after finally receiving my humvee, it had dead batteries, so I got some new batteries and install them then try to start the truck but I'm only getting it to crank as if it's not getting any fuel at all. My plan is to check the fuel filter and lines...
I notice on the C Turbos that you suppose to let them idle for 5 minutes before you shut them off, one thing I always wondered. What should the temperature of the turbo be before you shut it off? I currently have a temperature gauge to monitor the temperature and boost of my turbo
Are these kits even still available? I know waterloo use to make them, but it seems like they don't anymore. They use too do power steering as well, it seems like these kits are impossible to get now. Does anyone know of any other good source for deuce parts and kits?
So, two questions I got that I noticed others said. First question, if you put it into 2nd and then back to first, will this synchronize and shift into 1st without waiting or no grinding?
2nd question, I saw one guy said about starting in 2nd low then going to 2nd high and after that shift like...
I know the newer ECV humvees have the bigger cooling system, turbo, A/C, 2 inch body lift, and heavier duty suspension but what else is different? Do these ECV humvees have a stronger frame like the m1123 has over the m998 and do it have any other huge difference, especially in the engine?
I'm...
So, tomorrow I will go over my truck and see why my driver door is stuck. I went to walmart this week and my driver door decided that it didn't want to open anymore. It was working perfectly fine; I don't know why it decided to get stuck. Is this a common issue with the m35a2 doors? I assume...
I saw a humvee with these doors in my area a very long ago, but I had lost the picture of it. Now after like 10-12 years later I finally stumbled across a picture of these doors and was wondering what they were called or does anyone know why these doors were never used much?
I've been considering a PTO winch but I can't find any online neither have I seen anyone install one. I'm just curious how difficult this will and will I need a different transfer case as well?
I'm curious as to what I'll need to mount super singles on my deuce and what difference will I expect? I heard some people get better speed out of these, but what about steering? Also, what will I need to mount these? Will these fit directly on? I would like to just replace all 10 of my...
So, I recently picked up a m35a2 off ebay for 8k, it's in very good condition. I was just messing around in it and was wondering, what if you shut it off and forget the accessories on? Will it just drain the batteries or actually cause some damage? I know its something that can easily be forgotten
When I got back home today I decided to just look over the ECV Humvees and seeing how much they were going for. I notice some going for cheap and some for very high, but the one thing I notice is "Emarketplace." I thought this were only on stuff that's sold by individuals not on Government...
I seen this front bumper on a few humvees, does anyone knows the name of this bumper and does it originally comes in the front? It looks very similar to the rear airlift bumper, also, is this bumper is nearly as heavy duty as the rear one? I got a rear air lift bumper a few weeks and was very...
So, I know the difference with these is the half shafts, suspension, turbo, cooler, and AC but what else is different between the two? Is the chassis built stronger on the m1114s? Is there any other difference minus the armor?
So, this is a little question I got. I know there's a lot of stuff that gets removed doing demil that's harmless like the fording kit, but why in any world do they take out the air vents like the one in this picture. The one I won got the same thing removed, but its quite hidden in the pictures...
Where can I get my humvee insured in Louisiana? I called hagerty and he said they don't do insurance in this area. I assume even in Texas people have this issue
I will want to make my humvee a 4 man when I get it or some point down the future. What should I go for? A helmet top or slant back? I really like the slant back because its heavy duty and hard to get any dings in it, but I heard it leaks a lot. For the helmet top, it seems like its made of...
Out of curiosity, how much does this top weighs and will it be possible for me to remove this top myself or with one extra person? If you done it with tools, then what did you use to lift this?
Also, with the top on, is this over 8 feet tall?