Search results

Over a year for me also.

There's a third check valve on 90's and up trucks on fuel filter housing....its a weak one and should be fine leaving it.

Dec 17, 97

If the plates are original...doors have a 2 layer plate...outside is hard steel, and inside plate is soft steel.....just drill out rivets...remove plates...install some rivets in holes.

I have some...but only one side...I'll see if its the one.

The yellow and black tach drives work the same on the 4 screw buss bar tachs...as I tested a bunch with a drill and 24 vdc. I noticed that most of the black drives were on later 6.5NA GEP motors.

M1165 trucks did not have turrets...plate is factory. You can install one with that black adapter ring. The gear ring you have is not for that system...Its for a M1114. An M1114 bearing can work with that black ring by drilling 12 holes. I've had all types of these systems for years....before...

There are 2 different 4L80E trans...early and late...different bolt patterns....your pic is the late one.

I have some if needed.

.

Papers.

Also...with that serial #...truck is a 09 or 10-2007 truck.

M1165A1 before S.N. 300xxx has Sheppard steering box and big Idler / pitman arm and link. and the rest is the same as earlier turbo trucks. S.N. 300xxx and above have heavy duty frame, wilwood brakes, bigger transfer case with radiator cooling, along with rear diff...and sheppard steering...

Two 15 amps behind dash are for Heater fan, and other to gages. 4l80e trucks have a breaker behind batt. box on a panel. Light switch has a built in breaker. There are fuses for other systems on M1151/65/67 trucks behind batteries on horizontal B pillar area.

I have these available.$ 40 ea plus shipping.

What model 4 spd ?

Switch has a breaker built in...If its a US made one.

They get clogged easy ...the tube down inside is crushed where it goes close to flex plate, then back to round as it comes out.

I have a working tocnet system available

Thats the correct TSU. You never said if wait light comes on, and how many seconds. All those connectors are missing a socket...and black stuff probably dielectric grease.