Search results

Why are you starting a new thread stay in one thread

Here is a really good discussion on charging batteries from many many years ago. https://www.steelsoldiers.com/threads/mep-501a-question.123305/

Well after it was brought up on youtube how bad the first 850jr was by dirtperfect they made it right and untimately he ended up getting a different one, and it seems the D7 that Letsdig18 received had everything done to it that could be. Just my perception. Not trying to high jack this...

Glad to know that DirtPerfect on Youtubes first dozer experience from C&C was still the case that is happening. Only Youtubers must get a completely job ready machine. I know everything they sell is used but apparently the camera must not capture the whole picture going on. Glad this is...

Take a picture of your gauge, several have put aftermarket gauges in that are not accurate. close but not close enough. Since you do not have a temp gauge this might be a clue

The way its running wide open also sounds like the governer gear is broken or when someone replaced the injector pump they did not get the lever lined up with the fork through the peep hole

Part nunbers and NSN just like guyfang described in the other post you commented on. Several of us may have what you need. Just want to get the correct parts

Not real familiar with JohnDeere Engines, but has a critter crawled up and made a home causing a cylinder to fail or valve to stay open. Does this run contant or just when needed. Is the blowby as bad coming out of the oil fill cap as the dipstick?

Welcome Ohio Member where are you located?

I have been working on this Mep 701a it only has 106 hours but being as old as it is it needed some things. It came dry so fluids and filters, 24v battery was dead so i converted it to 2 12v batteries and replaced the 2 prong nato plug with the current plug because the wiring was so stiff...

If I read correctly you have run this Generator at 2 kw for 2000hours if that is the case is this thing wet stacked?

Looking for Condenser for my LMTV AC build TV040108 4130-01-528-1433

FYI they will never crank with the battle switch on. Like Klopp said above always double check the E stop it gets everyone.

Yes it has the fuel tank. It is meant to house and 803a and has a bracket on the side for an mep 531a. Drone support trailer. The whole platform lifts off. Thats a 1040 just setting on there not bolted down

Ray you mean this trailer, i have 2 of them

If You want the injection pump rebuilt i would look into Area Diesel before spending that much money on a new one.

That is pretty neat

Small update tonight. I have been sourcing parts all winter and doing a lot of thinking. new Either bottle and Gaskets are in waiting to be installed. One of the most frustrating things about the truck since i bought it has been getting in and out. I am a very large man. i do not mean long...

Have you cleared/Reset the faults on the fault panel before trying to start it again?

@simp5782 I think probably has take offs from parting trucks, that would be the easy button