Search results

looks good to me nothing to worry about

Before i set up my 1040 as my backup Generator. i used and can still use my Whisperwatt 300 amp Welder/Generator. 10kw of power, a Welder, and 28 gallons of fuel on board the trailer. it has served me well the last 5 years, over 4000 hours on the clock and that little Kubota D722 just sips the...

Now to get the topic back on Former military equipment, Mep 802, 803 AMMPS 1030, 1040 for your next investment.

Kubota Generators are not supported by normal Kubota ag equipment dealers, and in my area no one sells them or has information, but i have many pieces of equipment Kubota branded and others with just Kubota engines, contact me by PM if you have questions

Does it start using the decompression valve and rope start?

First thing is to check the E-stop, lots of little things can contribute to them not starting. lets not fire the parts cannon before we truly diagnose the unit. give us some more information. One of the most frustrating things about all of these Yanmar single cylinder engines is without prime...

https://www.steelsoldiers.com/threads/mep803a-thermostat.166108/ Here you go Also cheap ebay https://www.ebay.com/itm/196206324395

For an 803a i would not use Lawnmower batteries also parts wanted would be better in the classifieds section under parts wanted. Welcome to the group

@Light in the Dark

Hope to finally take the truck this year thought i would get this thread started so that i have constant reminders to work on the truck. already several people have reached out wanting some of my sale items, but would just be exciting to drive the truck that far. 45 Miles lol

This should be in a parts wanted listing. another new member here has an ebay listing for their control box, but neither one of you can PM due to number of posts. I will PM you with his listing

Did the listing on govplanet say the fuel pump was manipulated to run. go back through the listing

Good vendor got my cable from simp5782

From your single picture 2 things i see are that it is missing hardware on the skin and the ones that are missing tell me its an older 802 without the captive nuts, also it has had a fuel leak by the looks of the staining on the case. One positive note is that side marker light on the side of...

I have a couple of these 10kw Drone support trailers. They are made to have an 803, and mep 531, and other stuff has a 35 gallon fuel tank on the front. The pictures here have an ammps 1040 on it but taking brackets off this might work for your purpose. Also the entire platform lifts off with...

Now I need to find a bottle of starter fluid that mounts to the Stewart for the cold days. I just bought one from NAPA it had to be ordered. The gaskets i ordered as well they took longer than the bottle and you have to buy a dozen.

Blowing the picture up your hose clamps on the remote drain hose have the hose protruding out of the holes on the hose indicating the hose is on its way out and might be leaking

about 4 inches of fluffy snow, just enough to get the skidsteer and plow, but surprisingly no wind to cause drifts, grateful to not have ice.

Snow is coming down hard here. Had a call about a Generator last night. wondering at what point tonight when they lose power they will call me wanting to buy one lol

Glad I could help. As Ray said we have all been there