Search results

I had lots of issues getting my motor started in the cold. Everyone said to swap glow plugs, so I put new ones in- in the fall. Still had issues with cold starts. I had finally had enough and put an aftermarket GP wire harness in. IT WAS AMAZING the difference in start ability. Before I was...

I may have a correct deuce block available, I'll let you know this weekend.

Dh should be along soon. He still has stock of shear pins.

Shoot me a PM with shipping info, I'll send a shear pin for free. Doghead had a pile of them, I'll ask and let you know.

I wouldn't say that, I've got most of the turbos out there except for the Whistlers, never cared much for them.

I probably have this. I will look and post back.

I have personally put a turbo on 2 different trucks without changing the timing and they ran great. Could you post a link to the threads that the trucks didn't run well? These motors have a high comp ratio, I don't think 25psi would be a good idear, but I've only run a pyro, not a boost gauge...

Yes Kenny, a 939 case can go in place of an older unit. We did this on Opcom's 818 that we installed a M109 box on. That was the discovery that the 939 Tcases had overdrive in high range.

In

Watch the double-digit boost Tim. The 6.5 heads pop headgaskets at 15ish psi. Not sure on a turboed 6.2.

Count me in! Thanks Seco.

The dual thermostat isn't worth your time. Lots of guys swap back over to the single stat. Look at the diesel place and leroydiesel to see if its right for you. I am converting my dual stat 6.5 to single to put a db2 pump on it. Sick of the ds4 electronic gremlins. Might sell mine if you...

Also, I have a guy near me that needs an M35 fuel tank. I told him an A3 tank would be aluminum and a better option, but I'm not sure if they have an intank fuel pump like stock. Anyone have something available?

Yup, headed up Friday once I get off work. See you all there, I'll have some shine and whiskey, be prepared to damage your liver.

Could possibly be the torque converter. I have new in the box ones if you decide to swap it out. Just send a pm.

I'm in! Thanks to all the companies that support our site.

I'm working tonight and tomorrow night, but have info on stainless bolts and bushings when I'm off wed/thurs. The info has been posted by devilman if you feel like searching for it.

First thing I would check is, if its getting air at all. There is a pressure protection valve that will not pass air to the system, until you have 60psi(minimum) in your tanks. Next step, take the lines off the air cyl and see if they get air from the steering link. As always, BE EXTREMELY...

I've got some. I'll dig one up tomorrow and let you know.

I've got a bunch of stock shocks new in the box, up at the Beefco warehouse.