Search results

90deg going uphill for Miles ! Gauge going up to 240 even at 55. Around 205 when driving around town. But who knows how accurate that gauge is. Every bump I hit that gauge just freaks out. First real trip of any distance since I got it.

Gettin the funvee for this weekends parade , first time I really took it out on the freeway and went all speed racer, long uphill doing 60-65 (according to my gps) temp started going up , black smoke out the tailpipe stack , so oooops 😳 time to slow down and rtb. Everything still looks ok. I...

The only issue I had with using any acid based product is that if it’s not completely removed or neutralized and is present in some sediment it will continue to eat away at metals and you’ll get leaks. Just like rust , it never sleeps. 🥸

When I went to drain mine I couldn’t get mine open either. But I pulled the “plug” on the water pump and attached a garden hose to it. The radiator drain worked most of the time ( I could get to it to clean) but I just opened the hose full blast and started the truck and ran it at @ 2k until the...

I would suspect the injection pump is leaking into the crankcase

nopics

It may not be a wheel cyl. It could be the master bleeding into the airpac

There should be NO current drain from an led bulb. Is the ground on the tail light good especially if you used the tail light ground for the license plate light.

I’ve been looking around in the TM’s and haven’t found the part number or the name of the covers in the cargo area that cover the tcm and the hole across from it where seat could be installed.

Those 40+ year old gaskets are going to be so dry I doubt the hole would still line up.

After replacing the fuel pump. Took it to my favorite watering hole 😁

Just remember , it’s a government operation. Makes no sense to anyone other than them

I can’t see even wiring them “wrong” causing them to burn out , 24v across even or “backward “ won’t do crap. Unless it’s getting 30+ Volts won’t do crap other than burning real bright for “several” seconds before going all Kodak flash,if it’s a regular bulb you should see it’s too fu@n bright...

You forgot the bag of lye to mark the field. 😜

A nice "THIN" layer around the outside of the seal should work well to fill in any imperfection in the housing just remember Its not a toothpaste loop , use your finger to remove any access sealer. Also They make a seal installing lube but i think its more for more for pressing in a seal not...

I wish i had that much luck.CA DMV says no way on highway 🍌 i would use the the middle finger thing but i don't want to get another post removed for (they didn't say but lets just say Branson) upsetting the mods more than necessary. Im am going to use dirt legal to get it done, im planning on...

Most wheel bearing grease doesn't melt till well over 350deg. , excessive heat on the hub could be just the breaks dragging , but you also posted that the boots are cracked and leaking oil , there shouldn't be oil leaking from the boots unless the seals are bad allowing the diff oil to...

I posted this yesterday in the thread sf97? Things are looking up , i also bought mine 09/02/2022 was delivered 02/02/2022. Just go this today : ( yesterday ) Dear William H, The Title certificate for your recently purchased 1998 AM General M1123 HMMWV 2 Door w/Truck Body has been sent out...

Thats a sweet find 👍 Congrats !!

Things are looking up , i also bought mine 09/02/2022 was delivered 02/02/2022. Just go this today : Dear William H, The Title certificate for your recently purchased 1998 AM General M1123 HMMWV 2 Door w/Truck Body has been sent out by Fed-Ex Ground. The details of the shipment are below...