Search results

Picked up what appears to be a 1960 Ford M151 from Chuck last night and made it back to airport to pick up the wife with 5 minutes to spare. Will keep a picture log on this forum of the progress over the next year or two as I slowly restore this diamond in the ruff. I'll take a bunch of...

Any idea what these markings are?

Having problems with a military 361 V8. Engine was rebuilt about 10 years ago and was never started and the previous owner put a little marvel mystery oil in the cylinders every few months and turned it over. The carb currently does not have gas going to it. only trying to get it to fire with...

Looking for a hard or electronic copy of TM 9-2805-216-34 Thanks Jason

Looking to replace the factory carb and potentially the manifold on the 381 and was curious what carb is recommended, I know the Edelbrock (spelling?) 1405 was recommend. I have two other similar carbs and will check to see which ones I have when I get back. While I have the radiator out, is...

Need to borrow/rent a 10 Ton Gooseneck trailer to move a MV i purchased near Knoxville Tennessee. I have a Dodge 2500 with 5.9L Cummings and Banks Exhaust Brake and a few other mods (my truck is set up to tow the load, trailer and truck I'm hauling back). I will need the trailer for about 1-2...

about 18 ft long and 14K lbs.

Anyway to track down a V and who (what country) it was sold to and if it had Vietnam history? Jason

Which sights are for each config? 30/30 and 30/50...

WTB: V100 commando in restored or unrestored condition / Running / Not running. Please let me know what you have and include price. Thanks Jason

I used to be able to find the various MS###### spec sheets that would have the overall size of the bolt and the -## as the length. I can not find them now. Does anyone have a good source to find these. They are basically spec sheets for each MS item. Thanks Jason

I think i have two NOS M35 (gas engine) starters but need to confirm. Thanks Jason

Need a good pic of the starter. Thanks Jason

Need the left and right side ammo rack covers - Circled in red Need M151 Spare tire retainer and wing nut

I have a Mutt body that needs some work, mostly under body channel work. I have a large under body repair kit to assist. Here are pictures of what I need fixed. Prefer someone in the Southeast.

Thanks for the help in advance: 1. ammo steps (??) 2. Pin for travel lock (holds it in upper or lower position 3. Gas can bracket - one that goes on the inside of the body and reenforces the body for the weight of the gas can. (FOUND) 4. Antenna bracket

Looking for the following antenna mount:

SHe arrived today: She needs a little body work on the front channel, is there anyone that can be recommended in the Southeast that is good with them?

Needing any and all parts relating to the M151A1c and M825 106mm Rifle carrier. Let me know what you have Best regards, Jason

Looking for 5-7 modern looking British armored vehicles (wheel and tracked) for a film shoot in Ga next month. Static display only, will not be driven. Will pickup and return, fully insured. Need for a day or more of filming. Saladin, Saracen, Ferret, Fox, Scorpion, and soft skinned such as...