Search results

Interesting the plate and mount? On the front right wall.

I am going day trip on Sat. If anyone needs, I have a set of wooden hmmwv troop seats. Also seen a post here adapting them to a m101 trailer to carry passengers also

One of the easiest and cheapest things to help with zerk fittings is to install rubber caps after greasing to keep water and dirt out of the fittings. Similar to the ones used for brake bleeder screws.

Nice score! You know we will want lots of pics posted on this thread! nopics

Possibly sticking solenoids in pcb box?

I have the metal jerry can brackets.

Always best to start lower if in doubt. Use a 10amp. I would be surprised it draws more than that.

Depends on the fan but I suspect 10amp or 15amp will work. Fan should state what it draws?

So for perspective, The USMC "newer" models that are coming out have not yet been released by the other branches, so I would think there is a lot in the pipeline still to come even with the ones diverted to Ukraine. YMMV.

It is dimensional pricing and will knock your socks off due to measurements not weight. I was selling them here in New Orleans and UPS tried to bill me a stupid surcharge for oversize after the fact on my last shipment. I won the fight but it was an ordeal.

Try radio nerds https://www.radionerds.com/

Not sure if this is a tractor but known issue that the brake shoes sieze/rust to the drum and require bfh to drums....

That wrench extender is very interesting. I googled it and found it in Amazon. Might need to add to my overextended ( my wife's opinion ;-) ) holdings of hand tools.

Brass is "relatively" easier to remove than going back with steel or stainless if there is another problem down the road. A little heat, some penetrating oil, and a left hand twist extractor should make it a painless operation.... Teflon tape or preferably the liquid /paste sealer not only does...

High beam through floor dimmer switch

A master cylinder can leak internally and leak out of the rear. Check all hard lines especially if exposed to salt or deicing fluid plus rubber lines and wheel cylinders. Parking brake has its own warning light circuit when engaged. the low fluid warning circuit has a sensor on the...

I just thought it was sloppy casting clean up from the block. I had not seen that in a civy vehicle.

That answers the question with the regulator it is probably 200. Some older models had 100 but that is not as common as the 200. The 400 would power the space shuttle and weighs 17 tons...Lol Damn shame as the 200 is a small fortune. With a new key weight and pulley with a lock washer under the...

What flavor of Alt 60amp , 100, 200 or 400? I assume v belts so likely 60 or 200. Were all the mounting bolts and brace snug? Brackets?

On the m939, the heater core is a great place for funk to accumulate if not flushed out regularly. First time, I flushed it, I was amazed how much "mud" came out.