• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. m1010plowboy

    1956 M135 GMC I6 Conversion to Diesel?

    M135 learning curve As Mick Jagger says, "Jumpin' Jack flash it's a gas, gas, gas. It's great seeing another new guy go at these trucks so let's sit down and open up those manuals. I am no mechanic so not offering that kind of advice but it's mostly covered in the manuals. At one time...
  2. m1010plowboy

    1956 M135 GMC I6 Conversion to Diesel?

    You have our attention! Credit to the T's from MLU for the photo. There is still a bunch of work to do on the gauges. .......Just wanted to add that we must do some reading on potential radiation hazards with gauge packages before you dismantle anything...... You may need more gauge parts...
  3. m1010plowboy

    G749 preservation

    G749 Farm Twice the Fun We've been wildly occupado it seems. Planes, trains, automobiles, parades, parts, tunnels, bunkers, research and air raid sirens keep me busy when I'm not on the toilet. I gotta make time to get down south again. Those pictures you sent just made me miss your place more...
  4. m1010plowboy

    Oshkosh P-4 Fire Crashtruck Preservation

    P4 Preservation It's only been 4 years, where did everybody go? After selecting the storage location for the P4 years ago we had high water tickle her boots so pumps were needed to keep her dry last spring. Not many pics to share trying to keep the wheels straight but we did get Jellybean...
  5. m1010plowboy

    1956 M135 GMC I6 Conversion to Diesel?

    That dataplate looks like it's been rusted to the dash for a long time. There is a 2nd number stamped on the passenger side of the frame behind the front passenger side wheel and it should read 113505615. It's hard to see unless the frame is clean. It'd be nice to get the engine running to...
  6. m1010plowboy

    G749 preservation

    G749 Preservation Support Team Goose took another Canadian Veteran for a tour last week and it wasn't just another Veteran. This guy knew Goose the M135 better than Goose the M135 knew Goose the M135. Twenty six years of twisting wrenches on these trucks wasn't enough to keep him from knowing...
  7. m1010plowboy

    Deuce vs Fire

    A few of us don't feel so lonely anymore. Get the fans, heaters or dehumidifiers on it. Insurance tried to clean 4 of my vehicles from my shop fire. After a few months the wipers, signal lights....things with yellow metal in them gave out, slowly. Everything had to be scrapped. They washed...
  8. m1010plowboy

    1956 M135 GMC I6 Conversion to Diesel?

    My jitterbugs are rumbling. Is there a number stamped on the passenger side of the frame behind the passenger front wheel? About 16 inches long with 3/4 inch numbers? The wheels are odd and don't look like the correct offset for a M135. Obviously they could have put different wheels on it but...
  9. m1010plowboy

    What are these trucks exactly?

    Not sure about big red but ole' yellers may be worth scrap value. Or,..... a short fat balding guy may have removed the spark plugs every year, turned the motors, kept the critters out of the holes and replaced all the brake parts just before storing them. They could be drivers. There is an...
  10. m1010plowboy

    M135 Engine Power Issue

    Walk us through the symptoms in more detail. You say it starts up and idles. Can you get a full range of RPM when it's sitting there? Does the motor sound strong through all ranges of RPM when the truck is parked? An engine that isn't producing power while under load but runs fine just...
  11. m1010plowboy

    Show your 5 tons in the snow.

    2018 sept 12 snow 2018, Mid September snowfall in Central Alberta. Too early and too cold.
  12. m1010plowboy

    G749 preservation

    Deuce on Canvas This one is a good size and I think I'm in it for $500.00. Send Gerard a picture of what you want and a suggestion on size to get a price.
  13. m1010plowboy

    G749 preservation

    Early Deuce Painting Early Deuce in oil instead of dripping oil. I was sent this preliminary sketch and asked if I wanted to make changes. When we talked about doing a deuce painting I asked for his artistic freedom with respect to the authentic look of the original deuce.....and he nailed...
  14. m1010plowboy

    M135 Engine Power Issue

    Welcome aboard the crazy train. An Early Deuce can drive a guy nuts. Congrats on getting her home from a show. There is "typically" a small screen filter in the carb inlet. That screen can get plugged up. Do you have one? Do you have an internal fuel pump? If you do and you had a spare...
  15. m1010plowboy

    1st post, need info on wire chart for CDN M207 M211 GMC ?

    I have little to no idea. Looks like they gave a total wire length for different items and I don't see a good breakdown. The Crown is only half empty so I better put pictures up and type less. The schematic might help.
  16. m1010plowboy

    1st post, need info on wire chart for CDN M207 M211 GMC ?

    M207 Dental I did a little more digging into wire lengths and we do have them. The challenge will be going through the pages and determining which wire goes with which number. The harness is all the same color, black,....and each end is tagged. I see now that they wrote all the lengths down in...
  17. m1010plowboy

    1st post, need info on wire chart for CDN M207 M211 GMC ?

    M207 uses We're still wrestling with all the uses for the M207 Welcome to the adventure! Good to see another 207 out there. I just slept with mine last night. There are a lot of parts in your backyard so write up that needs list and we'll get you contacts. We know the 207 was a shop van...
  18. m1010plowboy

    Canada West MV Swap Meet August 25, 2018

    Aug 25 Red Deer Alberta If you haven't checked the air pressure in your tires recently this is the day to do it. You're going to need good rubbers for the trip up to Red Deer, Here are a few distances ...... New York to RD 2530 miles Tampa Bay to RD 2824 miles Yuma to RD 1678 nikes Big...
  19. m1010plowboy

    The unofficial g749 picture thread

    M211 300 mile move Bigger trailers and tow bars may be required because the dogs are only allowed to drive the jeeps.
  20. m1010plowboy

    DOT 5 & Seals

    Dot 5 stored indoors since new. Not great follow-up photos but good enough for the girls we go with. This is the MC piston with the decayed rubber seal. There were a few black particles in the fluid but the rubber on the shiny, 10 year old, rear cylinders feels new. This truck had a lot of...
Top