Search results

Howdy, Generator Accessories slide hammer slide rod driver/puller rod 5120-01-013-1676 SLIDE HAMMER, GROUND 13226E7741 ground rod, knuckles, ground strap, drive head bolt 5975-00-878-3791 RODS, GROUND SECTIONAL 9FT AA-55804-III-B 5975-00-794-2523 COUPLINGS, (THREE IN SET)...

Howdy, I made a new thread with the aux fuel hose connection info here Generator AUX fuel connections

Howdy, Generator AUX fuel connections Generator Accessories

Howdy, Adapter, Container NSN 5342-00-066-1235 MFR P/N: 13211E7541 Is the 5 gallon/55 gallon bung adapter which the aux fuel line connects to. Auxiliary Fuel Line NSN 4720-00-021-3320 Auxiliary fuel hose specs bung adapter in 5 gal MFC In a 55 gallon drum you use both pieces NOTE: 🔧...

Howdy, If anything, just fill it and turn it to prime for a while and then start it. Self priming recirculation with fuel return line back to tank.

Howdy, Very good input from member Zed254 on sourcing a Mark 3 start switch MEP-802A/803A S1 Master Switch Source - Electroswitch

Howdy Chris, Don't do it. for like $22 for 1 well nut.....

Howdy, Nice job. I see you have been reading the forums. I see you also hooked up the gauges to light up. ;)

Howdy, Think of the DN2M and the DN4M as everything the same except one is 2 cylinders and one is 4 cylinders. So many parts are the same. Injectors, pistons, rings, water pump, glow plugs, fuel pumps, and the control panels are the same. All the filters, etc... Hopefully you wont need much to...

Howdy, MEP-802A - Onan DN2M built engine based from Lister-Petter LPW2 engine, 2 cylinder MEP-803A - Onan DN4M built engine based from Lister-Petter LPW4 engine, 4 cylinder http://lmgtfy.com/?q=LPW4+water+pump

Howdy, nopics

Howdy, Why? Ya need one?

bump, it's getting lost deep sticky time :whistle:

Howdy, What's also helpful is finding specific part names and NSN numbers. It also has all the info about the fuse updates on the gen units. The last few pages also list all the TM numbers per unit.

Howdy, You are probably better off running you house as you would and then set it to 60Hz. That way the swing will be in your sweet spot of use. When no power draw is there, you might be around 61.5Hz running with no draw. If you look at any of my videos, you will see at first start, and...

Howdy, The best thing you can do for the generator is to run it loaded for a few hours. Fresh diesel fuel and a additive, and loaded via the lugs at least 80% or more. Keep a eye on the fuel return line for weeping.

Howdy, Double check your float first. Reach in and manipulate it up and down. Undo the wires and put a ohm meter on it and watch the readings as you move the float. You might not need a liquid level switch. The gasket is a standard SAE 5 gasket. Check with your local auto parts store.

Howdy, I believe I know exactly what he experienced. The shutdown solenoid has a black thumb screw type nut. With all the shaking going on, it vibrated loose and fell off. The electrical did its thing, and the solenoid moved, but was not attached to anything to actually shut it down. I was...

Howdy, Military part to civilian counterpart model Titan/Dico Model 6 hydraulic brake actuator. All the parts for repairing and fixing. cylinder, cap, breakaway, spring clip etc.. If he looks for a manual on what to fix, or replace to make them work.

Howdy, M1101, M1102, LTT-TQG Surge brake assembly