Search results

Holes drilled for right sponson and the c pillar part of it is bolted down

Yup I have those plastic pieces

Is this correct in the back, lined up with the back edge of the body?

Nothing yet, I also need to know exactly where to place the sponson to drill holes

Ok need help with sponson questions My passenger side is nos, what do I do about this gap? I had made a gasket from rubber but it's thin next question same sponson, is this small hole below the tube supposed to line up with something, this is a later sponson with the seatbelt bracket already...

I am missing the blocks with the bolts for the tubes to hold the seatbelt to the tube I have been to eastern with my humvee usually deal with Billy, hatch airlift bumper winch mount and bunch of other stuff came from there, they even did my temp senders for me in the parking lot

You mean these lol

The soft top is off gonna finish stripping this off and work on sponsons this weekend

I agree but it's made to be a sarcastic version of the trailer decal so it looks like it's supposed to be there

Ventured out in the cold to put this on before my little guy decided to stick it to a wall The yellow looks great in the pic in real life it's like that greenish yellow on some fire trucks

if i goto my google photos from the laptop to create a link to use here i get this message, and i know from experience this lets people look through all my pics not just view this one pic

I run royal purple in the center diffs and the planetary hubs ,no leaks, I also have a lift so I've been under the truck and checked everything I could think of with a prybar

I don't off road this vehicle and it does it in nice weather too, I could see a tire balance issue but this comes and goes , say I hit 50mph on speedo, truck may shake bad like I have a flat I slow down some and speed back up ,gone or very minimal I have serviced the outer hubs and checked...

That's from my cell phone but I'm not sure if it came from google or from my phone since it's on my phone, but I'm trying to get this to work from my laptop

the little picture frame opens a window that says drag and drop or add link, ive tried links but it wants to share the entire cloud not just the pic i want attach file just opens up my computer to attach pics on the computer , i dont really store pics on my

I know my alignment was off significantly but adding the winch,luverne bg , sup armored x doors and armored grills seems to have brought the front back down and fixed the camber and toe, though I can check the toe once snows gone

Yes, and I believe I checked the damper before, but can check again , I do know one of my low speed shakes is flat spot in at least one tire that goes away after a mile or so, I have 12 bolt rims with the wrangler m/t tires and run flats in them I just ran an errand and did run the rpm up in...

i have a vibration thats intermittant comes and goes from say 35 mph and up, sometimes it shakes the truck horribly, ive moved tires around with no change, checked front end, serviced the outer hubs and all fluids, checked torque on the cv bolts and checked ujoints, 1992 6.5 na

are there any yards within a reasonable drive from south jersey/philly area with hmmwv stuff?

how do i attach pics from my google cloud to a thread