Search results

There expensive, but there so cool.

The stripping had an adhesive backing on it. Also, there's clips around the door to hold it.

Nice truck So tell me about your trailer size length weight. I am considering buying a similiar trailer. What does a trailer like that cost?

Change your air filter, fuel filters, pull the intake pump to clean the pickup is where I would start. Basic pcms can help get your engine running a peak performance. I am not one for turning up the fuel, but it can be done safely if monitored.

The plates I got from TNJ looked good no complaints.

Funny......but what if they can't read??

Well, take breath and don't make things worse by getting frustrated. I would wait till it drys out and grab a shovel. However, it is manditory you post photo's

Is that copper tubing for the fuel return lines? Looks nice

Yeah me too don't let the canister rotate

I looked but could not find it. I know the one your talking about thought.

Just make sure it does not leak after you install it. Mine did I got busy at work and never got around to returning it.

Try this guy Steven We have the Data Plate in stock for $25.00 MasterCard or Visa ONLY Steve Gorelick ANTELOPE VALLEY EQUIPMENT & TRUCK PARTS 44532 Trevor Ave Lancaster, Ca. 93534 (661) 945 6788 phone (661) 942 6887 fax avettruck@aol.com

I vote fuel issue. Could be water, clogged filters, air leak, or bad pump. Heck maybe the hose on the fuel pump fell off.

Make sure your vent line to the draft tube is not blocked. Try adjusting the air regulator or replace it. I agree with other probably need to rebuild the airpack. Yes the air compressor runs off the governor. Here is a video reviewing the multifuel engine. Here is a video of my airpack operating

My setup is a 1" impact gun from Harbor freight and a 1 1/2" bud socket. I use the on board air to power the impact wrench. Here is a video of me using the tire inflation adapter.

I check the drive line probally loose bolts from the transfer to the transmission. At 2:15 in the video. Any more photo's?

Unbolt the filter from the top, install your new spin fuel filter, turn the accessory switch on, and bleed the air out.

Video i made

i agree flasher unit in the engine bay

I agree power bleeder is the way to go.