Search results

could you go into this a bit more? my relay that i put the pic up of is screwed right down to the metal

yes the white plug. i cut it and soldered on connectors. maybe i should have just bought 2 of them.tried to get as much done today as i could

OK got it thanks.

thanks doghead.. any idea what this thing is?

cam alternators be swapped from one side to another? they are the same right? cant think of it

Could someone tell me on generator 2. The white plug that goes in the top of the alternator. Where can I find that Plug? Mine is melted. Can't seem to find plug anywhere. Was thinking about putting on Crimp connectors till I can find it. generator 1. The plug is Covered in some kind of black...

Both fully recharge batteries back in. Cleaned up all the grounds again. Cleaned all the wire connections again. Dielectric grease on everything. Lights are a bit brighter. Both alternators back in. 24.5 V out the passenger side. 11.5 V on the driver side. Going to check the TMs see what they...

What would cause the connector to melt like that?

ok thanks im cleaning all the grounds again. cant find that connector for the alt.

I think the glow plugs were getting constant voltage because where the glow plug box is just touch the box it would click on again. Bad contact I guess. I was going to remove that card and put in a push button. Trying to find those screws for the fuse block. Relay is not stuck. I hear it click...

cant get to cucvelectric.com.. need to order a few things.. anyone else having this problem?

had great luck with my tuff country springs. bit more $$$ ride great

Here is a picture of the relay. Have both batteries charging now. Back feed through the grounds? That's no one on me. Rest of the wiring looks okay. The fuse block loose and the wire running over to the other side is all I see. I'll see if I can find the screws. Really nice out today can make...

Bringing this back up to the top. Did some work to this truck a few years back. My buddy got another truck. This one just parked in the corner of the yard. Looks like this truck will be mine soon. Went over and took a look at it drop some batteries and in Fired right up. I didn't realize before...

nice thanks

does it matter what head gasket i use? arp head bolts should be here soon

thanks for the help guys. i started this. so far its been smooth.

ok got it thanks

Thanks for the links. Never really think of searching much. Starting to think I should see if the heads have cracks. Will look into head studs too. Thanks.

Work is slowed down for me. Trying to make a few extra bucks thinking about taking on this guys project. its a m1008 6.5 is already in place. He bought a set of low mileage cucv heads. Someone told him that they flow more air. The 6.5 is a early 90s block. The cylinder heads are off a 86. He...