• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 84cucv1ton

    ticking sound in the bottom

    anyone else
  2. 84cucv1ton

    ticking sound in the bottom

    really? how does that work? thanks
  3. 84cucv1ton

    ticking sound in the bottom

    working on a 87 M1031 utility truck. Has 18,000 miles on it. done a lot of sitting. Finally got it started. Sounded great. not even a minute later there is as loud ticking noise. Could hear it clear as day with a truck on high idle. shut it off right away. I cranked it a bit before starting. To...
  4. 84cucv1ton

    M1008 still pulling to the right

    thanks guys worked on the box got the u joint in. a friend did the alignment.. straight as a arrow.[thumbzup]:driver:
  5. 84cucv1ton

    M1008 still pulling to the right

    thanks to all. this has helped.. steering box is a bit lose. right side axle u joint needs to be replaced..
  6. 84cucv1ton

    installing insulating in the cold not going to well...

    ill try it thanks
  7. 84cucv1ton

    M1008 still pulling to the right

    the 60 has new kingpins, shocks, stabilizer, calipers, hoses to calipers, tires and wheel bearings. what else could it be? im stumped.. thanks
  8. 84cucv1ton

    installing insulating in the cold not going to well...

    here is the original post: http://www.steelsoldiers.com/showthread.php?79548-insulating-and-making-a-cucv-a-bit-quieter been doing this after work.. no time during the day.. been unseeing the roll roofing still. my heat gun is just not cutting it.. how else can it be done?? hope to get this...
  9. 84cucv1ton

    anyone know where i can find a starter rebuild kit?

    im getting the rebuild kits from cucv electric.. thats what i needed for the starter.. i have the old heavy steel starter. think its the 27mt.. didnt have much luck with the 28 mt. think its the newer one from japan. rather have a stock replacement starter thanks guys
  10. 84cucv1ton

    Np 208 tc

    i would say hes right.. 208s are common. i have them all over the place
  11. 84cucv1ton

    anyone know where i can find a starter rebuild kit?

    been looking no luck.. dont what to buy another japan starter.. thanks any help your be great
  12. 84cucv1ton

    lots of smoke out driver side exhaust on startup

    ok good to know thanks
  13. 84cucv1ton

    lots of smoke out driver side exhaust on startup

    so i have a had good luck with the ac60s.. is there any other plugs to try?
  14. 84cucv1ton

    lots of smoke out driver side exhaust on startup

    yes i h ave learned that with those plugs.. have yet to have one swell up.. seem to be a good plug for 68 bucks
  15. 84cucv1ton

    lots of smoke out driver side exhaust on startup

    autolite plugs.. going to order ac60. hope they get here fast
  16. 84cucv1ton

    lots of smoke out driver side exhaust on startup

    i will check.. not sure what i used on this truck..
  17. 84cucv1ton

    lots of smoke out driver side exhaust on startup

    good morning. Just realizes the other day. Truck starts pretty good. Glow plugs are about a year and a half old. Injection pump has three or 4000 miles on it. Injectors have maybe 1000 miles on them. Passenger-side exhaust has just about no smoke. Any ideas? Thanks
  18. 84cucv1ton

    need a fast answer .. bad u joint?

    he got back fine.. no clunk forward to reverse.. just the locker.. dont remember it doing it.. thanks for the help
  19. 84cucv1ton

    need a fast answer .. bad u joint?

    ok thanks
Top