• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. olewhiskey

    New Guy from South Dakota

    Welcome !:beer:
  2. olewhiskey

    Will a DT466 fit in a M35a2

    I have an old Boom Digger with a DT 466 . Model1900s it runs like a scaled dog on the highway with just 1.1 4 speed. Will pull 75mph easy. up hills Thats with the boom tower,storage panniers, plate steel bed,controls everything. It would likely fit in the 2 1/2 ton frame. You may have to fab...
  3. olewhiskey

    Pulling out of Florida Saturday

    Be safe you got my number I sent to you,I am around this weekend .
  4. olewhiskey

    RAPCO Spray Can paint issues

    Didn't have time to swap out my dented tank for a parade tomorrow so I touched up the scrapes with a can that's been sitting under the drivers seat . Looked pretty good to me. 2cents
  5. olewhiskey

    53 inch tall tire on m35

    Yep, no body ever bought a A2 with any problems they are perrrffffeccttt. If I bought one I wouldn't be typing, they have a winning lottery ticket under the seat on every one the gummint sells !roflrofl
  6. olewhiskey

    EUC cleared in 21 days First one! Recovery today!

    Good luck with the recovery . I still may hold the record of 8 days for first time EUC but someone will be along in about three seconds to say otherwise LOL. Be safe, and as the old timers around here will tell us, there is no cure for the Green Iron fever.:beer:
  7. olewhiskey

    Newbie from Ga

    Welcome , you is near to Clinto1 and me.
  8. olewhiskey

    Exhaust selector/Diverter???

    Its easiest and best to match pipe diameter.:beer:
  9. olewhiskey

    Won my first A3 on GL today

    Bringing my first A3 home this June we blew a steer tire at road speed and took out a guardrail,bridge abutment,tow truck bill,front fender,fuel tank,two mud flaps,a CTIS wheel,CTIS valve,front spring perch,dented bumper bent trailer bows , two CTIS covers and a rear axle seal.
  10. olewhiskey

    Exhaust selector/Diverter???

    5 Inch Exhaust Diverter Valve Grand Rock HDT-5A Try this, its a bit more affordable.
  11. olewhiskey

    M35A3 Questions?????

    Well there was another in the same lot "striiped for parts"so I guess there is a first for everything.Go back ond reread this thread? This truck was already checked out by MDMorgan and SEToyota and the only part taken off was the CTIS, on both trucks. Started up and drove around the lot...
  12. olewhiskey

    M35A3 Questions?????

    Somebody put 15,000 miles on it,..........(?).
  13. olewhiskey

    Help Identify a trailer found in a field

    Kill that tree !
  14. olewhiskey

    M35A3 Questions?????

    Can't tell you, no road time yet, just lot drive, Moving it from off base storage to about two hours way, we will know then for sure.;-)
  15. olewhiskey

    M35A3 Questions?????

    Here you go,my latest, straight from the Georgia National Guard. BTW they replaced all the filters and hoses before they turned it in. They also completely removed the CTIS from the wheels and lines, with new stems and seals.
  16. olewhiskey

    Replace all your M35 weatherstripping

    Open Cell versus closed cell.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks