Search results

Picked these up recently. Gonna play around with them a little!

Everything transported and delivered! Great trip. Great Steel Soldiers members out there! No problems!

Delivery and pick up made in Tulsa, OK. Great folks. Sitting empty in Kansas City, MO. Heading out early a.m. 12-30. Route of travel will be Kansas City - Oklahoma City- Amarillo-Albuquerque-Las Cruces. Let me know if u need anything hauled that will fit in a 12' trailer. So far have a hard top...

Taking a 12' trailer. Room still available.

Btt Space still available. Leaving Christmas Day and staying in Amarillo, TX. 12-26 continuing to Kansas City, MO via Oklahoma City and Tulsa.

Riding empty as of today!

We won't be able to attend after all.

Btt

What type of frame are you working with?

Currently planning a trip from Las Cruces, NM to Kansas City, MO and returning to Las Cruces, NM. Weather Disclaimer Upfront! I'll be leaving jus before Christmas or right after and returning to Las Cruces around December 30. I will either be taking a 12' trailer or 20' trailer depending on...

Count us in for now! Always a GREAT TIME!!!

Have an M-810 and starts are a little harder in the cold. Does yours have Primer Heater? Power steering is a BIG PLUS, especially when you are backing short trailers up! Like Red said everything else is bigger and heavier! Good Luck!

I recently ran my XZL 14.00's with runflats and dropped air pressure down to 10psi for sand driving. One tire fell jus below 8psi and went flat almost lost bead. I raised psi to 12-15 psi and all tires held air with no further issues.

Welcome from up the street!

Our 1972 M-810 and camping rig headed to our local mudhole!

My son and I built and tested this hitch last Sumner! My son saw a weak point on most of these hitches being built! U NEED A Brace behind hitch!

We ended up parting the entire truck out. It was our first MV. My son and I learned quite a bit! Truck was an M931A1, rebuild out of Red River. Low hours and miles! Truck was immaculate! Anyways pressure tested cooling system and it turned out to be several bad liner seals. This caused a host...

Welcome. Don't forget to check ur airpack!

I too dealt with Ed Davis on numerous occasions! Great guy and very Humble! He will surely be missed!

48" wrecking bar from ur favorite tool place works fine! If your working in dirt use a small 1/4" thick 4"x4" steel plate under tire, so wrecking bar don't dig down.