Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Have you actually verified the gp's are good? my truck would cycle the relay just like the plugs were good, wait light, the whole 9 yards. If you have not actually checked each GP with a meter you should.
Check your glow plugs with an ohm meter, they should read around 1.3-1.5 ohms if good. Blade of the GP to a good engine ground. I had a problem with my 1028A3 recently, and discovered that I only had 2 good GP's, very, very hard to start.
When I say blade, I mean where the GP power lead...
Ok, here are some pics of the wheels I just got, and, a shot of the front axle on my 1028A3, which confirms what I was talking about regarding a bolt on adapter for dually wheels. Also pics of the 1031 and the bed.
Just got back from El Paso, scored 6 very nice Accuride wheels for 300.00, my "kit" is complete, now comes the hard part, actually putting it together. . . . so much fun gathering all the items though!
Picked up a set of D60 DRW hubs off epay, the DRW rotors are 48 dollars each from Oreilly's, so, all I need now are 8 steel 16x7 wheels. . . .
Thanks everyone, I learned something new!
I thought adapters were installed on the front and just bolted to the hub like a wheel would and then the...
I am considering converting my 1031 from a contact maint. truck to a dually shelter carrier. I have been trying to find a dually wheel kit with the front axle adapters and steel wheels to make it into a 1028 dually, but have not had much luck on the internet. If anyone has a source for the...