Search results

nobody said to be a member of SS that we would have to do math:-?

I'm not sure if I missed it but if you by pass the fdc, should you turn down your fuel or leave it?

I got an extra set of hubs for $50, went to the local community college and had them machined out 10 thousandth over for free. good to go. just takes alittle extra time to engage the front axle but time i have, money i don't

I wouldn't remove the thermostat. The thermostat controls engine temp and all engines run better at certain temps for maximum effecenty.

subscribed

awesome

What about the trailer brakes?

subcribed

I know there are many threads on adding a 12 volt system to a deuce. My questions is what type of fuse box are used/better to use? Aftermarked or junk yard find? Yes I used the search function so I'm asking for someone to point me in the right direction. Thanks

OK, today I got an extra set of hub milled out for the front to free wheel. No vibration. I'm going to drive it longer to verify but I'm looking at the front diff.

I had all the covers off in the cab to help with diagnostic. When the vibration starts, the transfer and trans both have no issue. I was going remove the front hub next but I'm fight a sinus infection today.

There is no wobble, however I noticed turning right the vibration would "slow down" compared to turning left. That is why I'm am looking at diff side gear

Well I had friend ride with me to day and we believe the vibration is masking the a problem with the front end. I'm thinking a differential side gear or bearing.

Their is no vibration in the steering wheel. I have no performance issues with the steering, brakes, clutch, or trans

Checked all the drive shafts, and hubs for excessive play.

I have a strange vibration in the cab. It only happens at around 30mph and it stops at around 15mph. The only thing I have done is flip the front upper spring purch. when the vibration started I flipped it back. It also only happens when I'm driving and I hit a bump in something. I'm leaning...

Subscribed

I'm interested

starting to come together More pics

That give me a place to start. Thanks. Is there a wiring diagram out there with this curcuit on it?