Search results

I am looking for two doors for my mep002A with ASK, need the battery door and the door that covers the oil filter. any help would be great.

I fired up my mep002a that came from WPAFB, picked it up on Monday, runs great, had new oil and full of fuel, any thoughts on a little problem, showed putting out 60 hrz once, then nothing, did not matter where the rpm was set. will check the tm when I have more time, thanks.

What direction should I rotate the engine, it is the engine only, trying to see if it will have oil pressure, I am standing looking at the ring gear, injection pump on the right. would I spin it to the right?

Anybody know the interior bed size of the m101a2?

I had to replace the electric fuel pump, yes I did the swap, the first pump was junk, had to get one fast, all they had was a mr gasket 12s, said on the package, not for diesel, seems to work fine, what in this pump would prevent it from being used with diesel?

I have a problem, replaced the IP and injectors last night, got it running, has a hesitation off idle, stalls after bringing the rpms up, do not believe there is any air problems, old pump was set 3/16 to the right on the timeing marks, I set this one dead on, could the timeing cause this...

A little help with a recent purchase, Wrench, wheel stud nut, geared socket nsn 5120003784411 I could not come up with any info with the nsn, will have 47 of these, hope they are what I think they are.

Does the M1009 have a check vale in the tank?, how does it keep fuel between the pump and the tank?

Electric fuel pump for m1009

Check the search some, nothing found as to my problem, wipers quit, put back up wiper motor in and work fine for two minutes,then nothing, so I am asking where is the ground for the wiper motor?

I am replacing the front seal due to a leak, found the stepxstep, that is a big help, located the front seal in the old fourm, but only one is listed, national 471463,or cr 18972, is this the seal?. If this is the inner seal, what number is the outer dust seal? Or is the outer dust seal the same...

The search gave me some help, but not enough. Finished the steering kit on my deuce, the regulator has air escaping out the bottom, it sems to do this until the pressure reaches 60, I know this regulator can be removed, has any one removed it and seen a difference?

Need a head count of who wants to convoy with myself and my two brothers to haspin, we will meet at the truck stop at I 70 and SR 42 AT 9:OO AM thursday morning, I can be reached at 614-440-9039, thanks.

What model would a 15 kw deisel genset be?, it is enclosed, is 400.00 fair price?

Anybody have a extra lock assembly for the tailgate on my M1009, mine is worn out and will not lock.

What is the easiest way to change the pintle set up on my M1009, buy a pintle with a ball as the base?

I have a question about the 12.5 by 20 michelin tires, my brother oldgrunt has these for his truck, first question, they are 40 inches tall, my 1100-20 are 42 inches tall, the 12.5 is the width, why would these be shorter than my 1100-20?, also, these tires have a max pressure of 55psi, mine are...

Having trouble finding shear pins for my winch, tried all the normal suppliers, any Ideas?

Old grunt and myself went last thursday to get his deuce out of Kentucky, 210 miles one way, easy trip down, ran 61 mph, the trip back was a pain, had Gimps towbar and that helped, but hard on the truck with the hills.

Has anybody had to replace the diaode, I think in a new style switch, my brother Oldgrunt and I crossed some wires while on a recovery to Kentucky to pick up his new truck. We put in a old style switch and got our lights back, so must have done some damage to the switch.