Search results

I have found the vin on our a3's frame (505036) but what is the rest of the vin?

I have taken it apart and cleaned and even replaced one of the washers but it would only seem right if there was some kind of sealant between the cover and the actual base. P.S. I really appreciate you guys getting under their and looking, I know its a pain.

does anyone know if there should be a gasket between the cover and the base of the valve safety relief?

I am talking about the cover up top with 4 screws in it.

Here it is.

The back tires on the deuce are always going flat and I am sure it is due to the CTIS because it tells me "Flat?".I believe that the problem is the valve that acts as a diaphragm aboce the air tanks because I can always feel air leaking from it. Can anyone tell me if there should be a gasket...

The back tires on my deuce always go flat and I am wondering if it is because of the diaphragm above the 2 air tanks. It is always leaking just a little air. Any ideas?

The tanks take probably a half hour to empty and the tires still have air but I just think that it is strange that when I come back in the morning that both back tires are empty and no other tires are.

I checked the tires with soapy water and I don't think that they are leaking. When I found the leak in the valve above the air tanks I could feel the air coming out so should I try and replace the valve and see if that works?

For some reason the back tires of my deuce are always going flat and I think it is because of a leak in the CTIS . Whenever I shut the truck off, I hear a leak but after a while it stops. I found a leak on a valve above the air tanks and am wondering if thats the reason for the back tires going...

Because turn signals was a part of this thread, I was wondering what the little slide is on the blinker handle.:confused:

I got an M35A3 the other day and right away noticed that the all of the tires on one side are on backwards. Is there a reason for this?:confused:

I am thinking about buying a solargizer for my m35A3 but will it do me any good if my truck sits in the shop with little sunlight?

I thought about one but I never figured what the box on the back is.

Probably considered a dumb question but I am wondering if a m35A2 hard top will fit m35A3.

agreed I definitely agree that it will burn through tires and be tough on the brakes! [thumbzup]