• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. wheelspinner

    Huck bolt removal tool

    Yes. And it works quickly and efficiently-however it’s bulky and just doesn’t fit well in some places.
  2. wheelspinner

    Frank8003 - RIP

    My last interaction was with Frank about the “oil line of death” on the 3116 engines. Even though he didn’t have one-he wanted to understand and share the details. I had a feeling the clock was winding down. RIP
  3. wheelspinner

    Huck bolt removal tool

    You only have to crack the collar. The nut will come right off then.
  4. wheelspinner

    Huck bolt removal tool

    It works well IF you have access. It’s a big tool and I couldn’t get to quite a few. I just used a small 3” cutting wheel to score them lengthwise. Then they come out pretty easy with a wrench and impact
  5. wheelspinner

    CUCV Markings in Army Service in Germany in the late 80s

    Sometimes pressure washing over the covered markings will reveal what’s below.
  6. wheelspinner

    Just Received My M1078 A0

    I have a few good take-out speedos. Send me a PM
  7. wheelspinner

    Aerodrome Tower Light Signal Reference Decal

    Funny I still remember using those lights when we moved “assets” in radio silence
  8. wheelspinner

    802a

    If you’re interested I have a couple of previously preserved engines. I haven’t run them but they turn free
  9. wheelspinner

    FMTV hydraulic pump and Transmission

    Pretty sure he’s talking about the air/hydraulic pump. The lower left button on your outside control box actuates it. Most likely a bad O-ring in there. Easy to pull out and check
  10. wheelspinner

    Post up those Point of View hood shots!

    60 mph in an open cab “war pig” MTV
  11. wheelspinner

    Findlay Ohio 2022 show, Sell, Trade, Wanted List/ May19-22

    Come to Denton NC and he does just that
  12. wheelspinner

    Gen 2 air conditioning install with C7 A1R - notes and pictures thus far.

    Thanks for the info. I have a 2007 that may be getting all of this soon. BTW-I have a 2010 M1081 that’s factory AC.
  13. wheelspinner

    What do you build?

    Dave it’s been a minute - poke poke prod prod
  14. wheelspinner

    Findlay Ohio 2022 show, Sell, Trade, Wanted List/ May19-22

    Yeah I left early today. Sorry I missed you. Glad you found one.
  15. wheelspinner

    Hi from NC. I just purchased an M1009

    Welcome from Asheboro. That truck looks familiar, I may have looked at that one somewhere along the line
  16. wheelspinner

    Findlay Ohio 2022 show, Sell, Trade, Wanted List/ May19-22

    Crap. I have 3 at home. Didn’t bring any. Come find me in the cattle pavilion
  17. wheelspinner

    1997 LMTV Journey

    The headlights plug into a pass through connector (it’s a female with a male outside and inside the bucket). Make sure those are tight and correctly connected. Is the dimmer turned up? Is your light control lower left switch fully up? That also controls dash lights. Breakers you can replace...
  18. wheelspinner

    CTIS help

    A0 can use any of them. A1r can only use the new one
  19. wheelspinner

    LMTV Hitch Extension Kit installed!

    Had a chance to get a bunch of these but had no idea they were unobtanium-got two just because. Then when I got an A1r truck I offered them up and WOW did they go fast. Live and learn
Top