Search results

Since this is not a civy engine, doubtful any one has put a kit together. Military mechanics will not get that deep but r&r a bad motor with a depot rebuilt.

What Model do you have? Could you post more pics form different angles? I think that is the block to run a rear bumper winch but it looks different than the valves I have seen on other models, if so yes it could be eliminated and the lines going to the rear if equipped. See if this helps...

Just let me know the next time you'all might get together in Red Stick and I might be able to come up from the Big Easy. Looks like a cool get together, Carry On :tank:

Rustoleum makes a rusty metal primer that can be rolled.

The one with the merdec camo looks like a m353 with a welding shop or hydraulic shop? Sitting on the frame. 1st one looks very old maybe WW2 vintage. Not as knowledgeable on those. @NDT hopefully can chime in

Check this thread https://www.steelsoldiers.com/threads/ever-see-inside-the-protective-control-box.113634/ Board is for reverse polarity protection if I recall and not needed. Was not on the original models or a1 .

My swag is Fuel contamination with high level of water at some point?

Substantial price difference in valves also. Non fording considerably cheaper.

I was successful in having an old school tire guy with a Coates balancer that does light truck wheels up to 1 ton. Lots of lead and he had no issues zeroing them out. Stock hmmwv rims with run flats. Most just shy away at the tire places as they don't want to work that hard.....imho Ymmv

Congrads! Me think you need a fording exhaust pipe ..... I might know someone....lol

Check with @timntrucks

Only USMC ecv/rev have come out. I suspect eventually army units will be released. Search here for a member that posts that is deeply involved in the process.... Ymmv .01

With your improved rear bar support system, can the stock curtain also be used?

I would change your oil & filter plus verify your transmission fluid level.

I think you are correct so back to the mystery? Take 2, maybe it is a m105 cover but the staves on the truck have been shortened?

Looks like gen set up on the m103 flat bed. Those don't have sides and use long specific staves but normal m101/105 bows. I do not know the p/u # for the set up. Those are not too common and probably worth more than m105 covers. On the m116 gen set flat beds ,the covers are rare.

The original are civy parts. Haldex formerly midland offers them rebuilt. Napa or truck pro should be able to order.

and the m1123 might have differences than my ole plain m998

I had not seen that. The top trays already have different sets of holes for height on the mounting tabs. I wandered what models or set ups needed the different spacing for the bottom feet as the tubs I believe are predrilled from amg. Then to add more to the mix you have the turbo dog houses...

I am not sure. What I found is there a ton of different tm's for install on hmmwv based on the radio (s) used or other gizmos they held and intercom thrown in the mix. R442, flavors of sincgars including double stack, and newer harris models. Also the different styles of navigation equipment...