Search results

Moog is oe to amg. They will not sell these to aftermarket hence a $370 idler arm:oops:

Correct, not the set up seen with these ususally but anything is possible. Could have been a comms truck then repurposed. Beltfed on epay normally has the other stuff missing.

not sure which spring pack you used but the original m116a1e1 I believe has extra leafs for additional weight load capacity around 500 for 3590

see these pdf's as it will give you a better idea of what the gizmo looked like erected and then stowed- Ab1386u on a hmmwv

Ab 1386u / qbeam mount. Google and a tm is available on radio nerds that can not be posted here due to distribution code. very few have a very large mast that folds horizontally and then stands up as a telescoping antenna but it does not look like others I have seen on the side of shelter...

19207-12503745, part number 12503745 Cage Code : 1MFR62161 Here is the info: https://www.parttarget.com/2530-01-563-6800_2530015636800_136643.html/-D1C36528-3BBF-4E0C-8801-182B3CB296AC Used on the xm1117. Ironically made 30 miles from me.... I did not realize the rim bolt pattern on those was...

Those protectors came with the rims and tires or did you source separately? Do you have part numbers/nsn/ or any info on them? They look like m939 5 ton rims but have never seen those previously?

Marine vehichles because of fording tend to get gooped up more at a field level than other services is my swag

I believe the military uses dow corning 738 waterproofing electrical silicone sealer

Is that Bias 36's on 12 bolt rims? If so that puppy must have come out of the smithsonian museum .....

Also the weight distribution and tounge weight. I see bad things happening especially if being towed nose high....

Mike, I have a set of chains with hooks that have been abused. The hooks are elongated but could be fixed with a torch which Is outside my skill set.... I think I have a manual leg. Just need to find it.... Text/call when you have a moment..

I do not like to spread rumors but I would stay away from HF jackstands. They have had multiple recalls in the last few years and I know nothing negative of their product currently but I would purchase another brand for piece of mind. I know they have updated their brands and quality. Their...

Check out this thread if you are looking for a source: https://www.steelsoldiers.com/threads/m101-trailer-series-brand-new-brake-levers.200176/

grommet for single cable usually antenna cable: https://haneyelectronic-com.3dcartstores.com/GROMMET-HMMWV-CABLE-INSTALLATION-A3046172_p_454.html Grommet for multiple cables: https://haneyelectronic-com.3dcartstores.com/GROMMET-HMMWV-CABLE-INSTALLATION-A3046185_p_456.html Or...

The hose I suspect is nothing more than being used as a cable guard/protector. Follow it along the rest of its path and report back (pic would be great) as I do not recall anything mechanical in that area requiring a hose. That area next to the doghouse is where power for radios and gizmos...

The cable flange : https://haneyelectronic-com.3dcartstores.com/GROMMET-RETAINER-HMMWV-CABLE-INSTALLATION-A3046169_p_457.html They use different rubber grommets. Some are one cable, some are 2,3, or 4 smaller cables depending on what gizmo is being used.

There has been other gp listings before but not usually sets....

There are some one piece aftermarket rims out there but very expensive and scarce. I think the range is 50-70's on power wagons. I am not as well versed on those.

I believe kascar sells the swollen extraction tool. I suspect cheaper than the supplier you were thinking of. No dog in the hunt but I found them solid vendor and most prices cheapest or in line..... Ymmv