Search results

Howdy, Onan or somebody painted the engine at some point.

Howdy, I am surprised finding a stupid little gasket is so tough out there.

Howdy, Good timing. My MEP-803a is showing signs of the original braided fuel return line is weeping. I will be replacing all the fuel return lines and tees.

MEP-8xx exhaust gasket Howdy, I am looking for a MEP-803a exhaust gasket. The one between the exhaust manifold and the muffler. I am striking out finding one. I finally found a kit of 5 exhaust manifold gaskets. Now that part is done, I just need this gasket.

Howdy, OK, I understand. All the bulbs are standard incandescent. So swap out the bulbs for the 12v counterparts for a brighter safer day. OK, thanks. PU-798A Unit = Mep-803a with a M1102 trailer Rear brake, turn light bulbs #1683 24v bulbs swamped to #1156 12v bulbs Marker lights all round...

Howdy, I have a Oct 2006 m1102 trailer which I cut off the mil plug and simply wired in a RV 7-way plug. I was preparing to change bulbs and such. But all my lights function and work correctly. Marker lights, turn signals, hazards, brakes. Do I still need to change or move around bulbs?

Howdy, The 2/0 wire and Anderson SB350 ends are for my 30kw Tiger Power PTO generator. The sb350 pair plugs into this box here, which is a complete transfer switch at the main meter.

Howdy, I too was under the impression it was a m116a3 But now, after looking around, they have just grouped them in with the other names. http://www.schuttindustries.com/Military/Trailers/Light-Tactical/LTT-TQG-NAME.aspx Mine was at first known as M116A3 High-Mobility. I now see it would be a...

Howdy, It really depends on whether you are mounting the generator to be permanent. If that is the case, you would then use conduit and get #6 THHN. If you will only connect it to the power inlet, then I would suggest a few methods. Tin the ends... or you could look over the various Anderson...

Howdy, Anyone have a lead to the Onan DNxM diesel engine paint?

Howdy, I was thinking the same thing. Haven't heard anything in a while. I would hope 1 or more are together and working. :tank:

Howdy, OK, If my unit is the standard example of genset being sold.... you really need to do a 1-2 hour load test to clean out the pipes. I removed my muffler, and removed the exhaust manifold. I manually scrapped out the pathways in the head. Cleaned out the muffler as best as I could...

Hitch height was at 21 inches at the saddle of the pintle I just posted up a summary of the generator I got. http://www.steelsoldiers.com/showthread.php?138875-New-to-me-PU798A-(Mep-803a-on-a-M116a3-high-mobility)&p=1707939&viewfull=1#post1707939

New to me PU-798A (MEP-803A on a LTT-TQG high mobility) Change the title New to me PU-798A (MEP-803A on a LTT-TQG high mobility) Howdy, I now own a MEP-803a on a LTT-TQG high mobility trailer. The combo is known as a PU-798A High Mobility. I do not understand how some items get sold, and some...

Howdy, I just got done towing my Mep-803a home. Dodge 2500, Tractor Supply 2" receiver tube pintle hitch. No ball style, since I have all those already. The whole generator and trailer followed nicely. Cruising I-81 doing 70 without issue. Approx 80 mile trip from Letterkenny.

My experience with GovPlanet.com recovery I was lucky enough to win the bidding for a 2007 PU-798A (MEP-803a on a M1102 Genset trailer) in Chambersburg, Pennsylvania. I also am about 80 miles away. I prepared for the recovery. Being prepared really is important here due to being away from home...

Howdy, The interlock is fine. It also gives you the option of running larger wire and putting in a larger dual pole breaker for the size of your genset. Some states in the United States are nanny states. A proper UL approved interlock from the main panel manufacturer will be code compliant...