Search results

I assume with gen set(s) ?

Remember this is a gray area that Vt allowed in having vehicles registered in their state but domicile elsewhere. Do you really want to rattle them and pizz off the golden goose. Smart for them as they collect fees and tax with no wear on their roads. They might want out of the market as many...

That looks like the newer style m1101/1102 chassis gen set trailer with hmmwv tires. I think the designation is LTT trailer made by Schutt or others. Some can be specially configured and I have seen some with a belly tank. Typically they do not have covers on the LTT series so this could be a...

Looks like a m116 gen set trailer. Covers are super rare. Hard to tell in pics but maybe an a3 with hmmwv tires/rims. Any other pics?

Very Cool. Where did you find the window?

The original is a simple safety pin either rounded or square with a lanyard. Pins can be found at hardware or any parts store. I got some 1/8 stainless wire and ferules at home depot and made my own lanyard. You will need 2 of everything as the handle also has it own pin and lanyard.

There was a kit for mounting 2 tall antennas on troop carriers and the high back amtech clamshells for 2 man configurations.

Send me a pm as I have a spare nos

I used hog rings. Not exact but close enough...

Welcome to the madness! Buckle up and hold on. My son used to teach at the Outdoor Academy close by. Beautiful scenery and country! Go check out sliding rock. It is a blast :)

That corresponds to a Gates K081124 8 groves 112 2/5 inches long

Typically red oak

Cogs make no difference . Dayco and goodyear use them but gates does not. If the belt has a number starting with K any parts store can supply. Serpentine belts have a universal numbering system. Number of grooves and overall length.

That stuff looks like it would be a perfect drink for one of those flaming dragons :) no disposal necessary....:burn:

The black one is for electric warn winch. They have the same cannon dash plug. You need yellow or rewire the black one for milemarker hydraulic winch. There are threads here on how to do it.

Maybe not the answer you seek or the right one but 3 inches is not a huge deal and can hardly be noticed. Especially if you mod the fenders & add conspicuity tape plus add mud flaps, no one will bother you. I have run dually m105 and m107 trailers with stock fenders and not had any leo issues...

Csm Davis here might know that csm as he served at Camp Shelby. Not too many csm at one base.... What color is your winch control ?

That looks like a crazy stupid price for a delco or clone unit even with whatever that bracket is that it requires. You can do much better for 5 bills in my opinion for the stock 60amp unit but we need the whole picture as noted belt(s) and brackets different plus 24v/12v. Who is the vendor...

I did not know those where parachute straps. I have many in different lengths and not one problem pulling vehicles, stumps, or fence posts. For the price very reasonable as there was flood on ebay several years ago of them. And for ole people like me, much lighter than chains.......

No, Outing a vendor for cause is not an issue that I am aware of. Thanks for the feedback. It will help others in their quest for parts. Personally I use Kascar and mac motors. I compare prices. Tax is sometimes an issue for me as Mac has a La office and I have to pay our wonderful banana...