Search results

try googling the nsn?

Fold the leg up. Or, use the tow vehicle to move the trailers onto the hauling trailer.

AGM(OP), why did you delete your original comment ?

So, why get a lawyer involved now?

Why, did this happen to you, or are you just paranoid? If they were sold for off road use only, and you are following the contract terms(agreed to when you bid), what could possibly concern you?

I googled the part number, it looks to be a common part(used on 5.9 also). http://puredieselpower.com/dodge-products/89-98-dodge-5.9l-cummins-check-valve-w-crush-washers.html Also guessing that if you looked it up in the TM(-P), you'd find it easily also...

Some people have used a 3/4"x 1" bushing and used the feet and pins you have to tow trucks with the 1" hole. Tractor Supply has them in the 3 point hitch pin section.

I have some, pm if you're interested.

I should have taken a few more pics, the boat is about 12' wide, 42' long and while on a trailer it was just under 14' tall(made it a mile down the road). I simply parked beside it, and pulled both motors and set them down for a small excavator to grab and set them off to be rebuilt. The...

To test one properly, you need to control the fuel pressure(and read it), to see when it releases(pops). Also important is spray pattern. Also important is no leakage up to the "pop off" pressure. Your test proved it squirted, and nothing else.

Normal, sometimes... Acceptable, yes.

I think your tank supports are on top of the tank.

The one in your picture is rated at 18-32 volts. (control voltage) The cucv uses 12 volts to actuate the gp relay. 24059 is the 12 volt unit in the model you posted a picture of. It will work, but its only rated at 80 amps. There are better choices. Read the stickies... I'm sure many...

no

http://www.steelsoldiers.com/showthread.php?26750-Emergency-flashers-on-Deuce

What's a winch bypass?

Have you tried any of the (long time existing)major MV businesses or site advertising sponsors?

Merged your new thread with old one, next time just continue the thread you started.

Huh?

post a picture