• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. DieselAddict

    MEP-831A Governor Control Replaced - no start

    For sure. I've been able to free up every stuck one I've come across with some patience. I'm into double digits.
  2. DieselAddict

    MEP 802 w trailer. What’s it worth ?

    Have you called and talked to the person on the phone? What was your impression? Did they seem to know anything about the machine or the generators in general? Have they done any maintenance? Have they run it? Load tested it? The conversation should be very informative on what you should be...
  3. DieselAddict

    MEP-831A 3kw generator, overload @ 2.4kw

    If you find that each half of the inverter can handle 1.5kw, you can put it back into 120v mode and put a jumper between L1 and L2 to test. It could be that the relay that does that internally has a problem.
  4. DieselAddict

    Generator not starting right

    Please get the TM out and let us know exactly what happened. Photos help.
  5. DieselAddict

    MEP-802a water temp

    Did you notice if the fan was moving air? Check the accessory belt?
  6. DieselAddict

    East Coast Winter Storm - JAN 10

    I just went out to check on things and the roads are covered in snow compacted and frozen solid by freezing rain. It doesn't even leave footprints when you walk on it. So far the power is still on. The trees have a decent glaze of ice but not so much that they look heavy. Yesterday I covered the...
  7. DieselAddict

    East Coast Winter Storm - JAN 10

    Well, I got called to extract a neighbors vehicle from a ditch. Just got back from that fun adventure. The roads around me are really bad. We have had snow and freezing rain for the last few hours. We may just have to fire the generators up yet...
  8. DieselAddict

    East Coast Winter Storm - JAN 10

    I hope they aren't in the path of the "icy" part of the storm. The snow is finally falling here at a rate that I would call snowing. Still got a big dewpoint to temperature spread so the flakes are really small. The chickens are really confused. They haven't seen snow before.
  9. DieselAddict

    East Coast Winter Storm - JAN 10

    I got a message today from someone wanting one RIGHT NOW. Had to tell him that I get them ready as people want to buy them and it will take me a week or so to have one ready for them.
  10. DieselAddict

    Convert MEP-803a to Inverter?

    I have a pair of Schneider XWPRO6848 inverters. They can provide around 14kw continuously and 1.5x that for 30 min. They can take utility power OR generator power and charge batteries. They can also supplement the generator power when you need more than it can provide. You can bring in other...
  11. DieselAddict

    East Coast Winter Storm - JAN 10

    I'm half-n-half. All the high power appliances are on grid. Lights, fridge, TV, and internet are off grid. With the new heatpump doing as well as it is, I'm planning to move it over to the inverter in the spring.
  12. DieselAddict

    East Coast Winter Storm - JAN 10

    We've all seen our share of bad decisions. Even made a few myself. Thanks for helping keep us straight! :)
  13. DieselAddict

    East Coast Winter Storm - JAN 10

    You mean the 6 gauge Type W? Yes I am! :D Edit - According to the spec sheet its good for over 80 amps. (y)
  14. DieselAddict

    Mep 831a black smoke won't rev up and shooting flames out the exhaust

    Ug, all bets are off then. You need to start from square one. The first thing I would do is pull the valve cover and check your valve action and timing.
  15. DieselAddict

    Mep 831a black smoke won't rev up and shooting flames out the exhaust

    Were there any signs that anyone had worked on the unit before?
  16. DieselAddict

    East Coast Winter Storm - JAN 10

    In anticipation of the upcoming snow/sleet/ice event predicted for central NC on Friday, I decided to give the MEP1030s a test run. I wanted to see how the new heatpump worked while on generator power. Had no problems with the heatpump. One thing that did surprise me is when the heatpump comes...
  17. DieselAddict

    Convert MEP-803a to Inverter?

    I don’t think converting it to an inverter style generator is practical. You can add an external hybrid inverter into the mix to give you more flexibility and fuel efficiency. Since I put in my system which has Solar with battery storage, I run the generator far less for outages than I used to.
  18. DieselAddict

    MEP-803A Fuel Gauge issue

    It is possible that the float is binding or the sensor on the float is bad/dirty. The stalk can be turned in its mount so it could be a simple problem of it not being oriented correctly in the tank. The low fuel float is on a separate stalk. The same comment does apply in regards to...
  19. DieselAddict

    Mep 831a black smoke won't rev up and shooting flames out the exhaust

    Nothing really "holds" them together. They are precision machined and don't even have any rubber seals inside. Makes sense since rubber would not survive the pressures. You unscrew the top of the pump and the rest of the guts will come out (assuming its not gummed up). They are super simple...
  20. DieselAddict

    Gov Planet fee increase for bidders

    For the last auction in mid December where I picked up a couple of items, they charged me the 15% premium. Was very noticeable on the MEP803. Its not likely that I'll be back to buy anything.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks