Search results

I use a brass rod (1/2" or 5/8") to drive it out. It takes a little driving to get it out.

Eriks in CA has the wire. https://www.eriksmilitarysurplus.com/prwiformive1.html

I ran my tie downs tight so the S280 does not jump up and down and the cables do not jump around.

It uses the truck fan for cooling. You have to replace the fan switch with a elec. one and then wire it into the AC unit, not that big of a deal. I think I may have a condenser for a Hmmwv that has the fans on it. Looks like this. I little big to ship.

It is for the M939's I do not think it has hardware, I think when I did my trucks I just bent some flat metal and made them. But that was some time back.

I saw one here on S/S forsale https://www.steelsoldiers.com/threads/m939a2-a-c-compressor-mount-kit.220396/ I have a condenser that goes in front of the Radiator I would sale. it is new

Looking good!

Here is a pic of the pin 5/8" dia. and it is made of steel.

I have some pins in my M936, I will try to remember to take a photo later and post it.

The Pulse Sensor is used for the diagnostic plug under the dash on the right side. You can remove it if you want.

Welcome to the site.

I used the thick one also.

That is not Tom's truck. Tom's was all black.

Post a photo and I can tell you if it is Tom's.

Welcome to S/S. I have a friend that has one for sale in Phoenix for a fare price. PM me if your interested.

I would say it is a 1985. I have a M923A1 that is a 1985.

I know that is the one. It needs to be the one that is about 2" thick.

You are right that is not the right one, here is the right one Baldwin p/n OB1368 and the oil filter is wix 51970 or Baldwin B96 I have been using them for many years now.

Very Nice!

Looks like it is coming along!(y)