Search results

These are the various plates used to hold the springs on the front axle. I do not need the ubolts. I need another set like what you see. If you have some LMK what you want for them or if you know where I can get some LMK.

Yep thats me. Heres the ad: Smooth/quiet running motor, it is smoking a little, dont know if it is running lean or burning oil. Carb has been rebuilt. Vehicle sat on drive way for 2weeks and did not leak anything. Two new batteries.New 3lever light switch Has a new aftermarket fuel pump(still...

I have a whistler turbo off of a Hercules will this bolt to a LDT465 manifold ? will it work on anything else? Thanks Chris

A local guy has some Rockwells on a non-running deuce in my area. I need to know if they are the "U-joint" type. I tried to fill behind the rubber boot, But could not get my hand behind what seems to be a flange on the end of the axle tube.. It is in a 1970 model. The data tag says Rockwell...

I want the ones with the U-joint in the front axle. I need one front and one rear. I have M715 stuff to trade or cash. email: elohimfirst@msn.com Phone: 513-523-4918

Can I hook a 12volt Hydro pump up to my M1008 truck without great difficulty? It is 24volt. Thanks in advance.

New to these and have a couple ?'S. 1)Are all the 6.2 s the same in these ? 2)Are the banks turbo's a good upgrade and are they fairly easy to install? 3)How much lift would I need to clear 44" tires ? 4) Is there a Detroit locker in the rear of these ? Here is a link...

Someone in my area has these in a 1986 ford telephone comp. truck. It has 99K miles on it. The truck has a Hyd. winch on it also. The boom has been removed from the vehicle. The truck is very clean. I believe I can get it for about $3500. I was wandering if the motor and tranny could be made to...

Saturn surplus is out of these pumps. All the other sources I have found are about twice the money. Saturn sold theirs for $36.50. Does anyone have another source for about this price? I would like to have one.

parts Do you still have these?

I know a guy with a m135. Truck is in good shape. There is some carb problems. Has hard top. Has the winch, but cable is broken. Has converted to 8 tires on th rear as opposed to the 4. tires are in good shape. Brakes seem to be good. Gas tank needs cleaned. What is a descent price for a truck...

I have seen a person sell some 11' cables from time to time on ebay. I missed the last 20' cable on there. Does anyone have one for sale or can you refer me to someone? Thanks Chris

What kind of speed are you getting at about 2300-2400 rpm ? Thanks Chris

I used 30" steel line on one side and 40" steel line on the other side. The 40" was pushing it , causing me to relocate where the "T" mounts by about 2". These lines were 1/4" O.D. Carquest made up the rubber lines and I think they were about 27" longand had a fixed fitting on one end with a...

I replaced lines from master cylinder, back (both rear axles). It only took less than 3 quarts to flush system.

Where do you install the hoses on the block ? Looks like one goes just behind the top radiator hose, was wandering where the other went ? Thanks Chris

I am wandering if the 1100x20 tires made for the 5 ton will fit on the 2 1/2 ton with out rubbing in the rear. thanks Chris

Who has dot 5 for $30 a gallon ? What would happen if you mix Dot3 and Dot 5 ?

I have replaced my brake lines on the rear axles. I know the military used dot 5 and its expensive. Can i use dot 3 ? What are the negative attributes? How many quarts will it take to bleed and fill the system? Thanks Chris

I blew a brake line and I am going to change them all. LMK if you know of somene who sell the whole set. thanks Chris