Search results

Glad you had a safe trip, always fun to have a good road trip. There are some great guys here on the site always willing to help out.

Well said!!! Great work!!

Yes it works just fine. I think it is just a pressure switch.

Yes the one on the bottom can be removed, I have a truck that does not have it installed.

I think keeping the Spare tire and davit due to the Hyd. tank is by the spare tire.

It need to be up for normal driving and only used for applying trailer brakes. Like when your hooking up to a trailer to test if it is locked in the 5th wheel.

I am not sure the 5/8" wire rope would fit all the pulleys on the boom.

I would look at the the neutral start switch, black control box, solenoid or wiring. Try to short the solenoid and see if it turns over.

Did you open the bleed screw on the back of the pump and pump on the primer pump till fuel came out?

Yes the m930 uses the same oil tank that the dump uses.

Here is the one I used, Long story LOL, There are others that may cost less. The things you need are open center, spring centered, (DA) double acting. Surplus Center 9-20-2-X I did not use a spool that is for a motor...

I looked at my M932A2 and M925, It looks to be about the same, I think you could get it to work. Like what dilligef13 said about the mounts.

Welcome to SS

I guess I did not word that right. The clinking is a good sign that it is not the ECU or the relay valves.

You can jack up the axle and do the test from the TM on the Sensors, they may just need adjusting in or out. If you can hear the clicking I would think the Sensors are bad or out of adjustment. Erick's has them. But I would test them before you buy any...

:ditto:

I had a problem with a Gen. battery some years back. I had it on charge, then I took it off the charger and about a min. later I hit the starter and the battery blow up. Luckily I was on the other side of the Gen.

Nice job!!!

They are in the the back of Vol. 4 of the TM 9-2320-272-24-4

The A0 & A1 is a little shorter, this is a pic of an A2. Maybe not as much as I marked in the pic and I think I have the angle wrong a little.