Search results

A u joint could clunk.

Dave you can get one from an 89 surburban 3/4 ton its 32 spline bolts right in nothing changes I have pictures on my build thread its passenger drop 32 spline.

I got my 241 for 50 bucks I don't know what your paying.

No the np241 is a direct swap nothing changes

Did you try 4 low?

Its the same as a civvy

well you have 3 options. either keep the 208, build or buy a 205 but you need to bore out the 205 case to accept the bigger 32 spline (P/N 50-3202) | Advance Adapters or find a 205 that came off a th400 but you wont have as much as a low gear as the 208 only 2.00 vs 2.65. or you can find a np241...

What's. SB in your location?

There is a link to the tm in the cucv wiki

I put a new modulator in my th400 but i put an adjustable one.

sure the vrv is on the Injection Pump on the left hand side. It has to rubber hoses leading off it one to the vacuum pump and one to the metal line running to the transmission. some times the rubber part on the vrv goes bad if so just remove the rubber block and plug the lines in to the pump...

haha im not ready to buy a M1009 yet. soon but not right now i have a list of car related things to do first.

give it to me ill take care of it.

I know i cant wait to install my lock right.

Maybe because the economy

Looks good man. The rear locker is insane

Or cut the floor out get a pannel from lmc and have some one weld it in.

3.5 inches back spacing

the hub gasket is a 10 min fix

you can with either 373 gears or 37's or bigger