Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
it does not matter all front springs are the same length unless you go with longer front spring like a 52. i am running 2.5 inch wide springs in the front.
you can also look for a Np241C from a 89 suburban only its a 32 spine direct bolt in for the 208. it has a lower rang than a Np208. to swap a Np205 you need an adapter ,machine the 205 to fit the bigger bearing and then a new spline for the Np205. or try to find a Np205 that fits a TH400
U-Bolt Kits | U-Bolts / Spring Plates / Perches | WFOConcepts.com this is what i used on my truck and they can built you a set of rear u bolts and the plates you need to do the u bolt flip in the rear
No turbo just a stock 6.2 ill only add hummv headders. The shop I talked to said the head is worn on my pump. And they don't have my core so thy can only rebuild mine.
Where are you guys getting your Injection Pumps from and i have been quoted around 700 to rebuild mine. is that normal or any other alternatives out there? Are the ones on E bay safe to buy ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.