Search results

This truck was never restored and came from Ft Riley Sorry I can find the rear these are from an Ordnance manual

zebedee where are you going to be set up at? I need two sets of those for my AAR shop office. Duh I know where you will be!

Gillespie is old school NON ACRYLIC ALKYD ENAMEL Lacquer shot over enamel and watched the surface wrinkle like a prune. Lacquer on lacquer, enamel on enamel unless you use a sealer. http://www.hotrod.com/how-to/paint-body/1308-pointers-on-picking-paint/

Try looking under Sleeve Style Air Spring, if I remember that is what they are called. http://firestoneip.com/actuators-isolators-support

Oh, the under bed storage door, pretty sure I saw a couple out there that were still straight and something that size will not be a problem. On the WWII cargo trucks it was called the tool box door as most did not have them mounted on the sides.

Welcome from Kansas I used to live in Goodyear when I was a little kid.

You could do what my buddy Gary did with his and make a gun truck.

It's an ISO bed but the traps roll up the same #13

On a side note I have a German made TFK250 with an inertia brake system (surge brake) it is over 2,000 lbs empty and it works pretty good, but is jerky at stops and is less than 1/2 the weight of an empty 1061. I have pulled both behind my 3500 Chevy box van with class 4 hitch, my 1061 was...

It's SWB's Pictionary‎ for bad spellers answer is, Gimpy has a vice for wenches

Yep if the 1061 has one of these and the system is working

UP Date 4/12/15 Remember a lot of the older posts with Behr #'s on the lids are not true FS they were color matched, so start with a clean slate. Tell the clerk the list of the FS codes in the HD paint computer is found by going under "Competitor Color look up" and selecting Federal Standard...

Just got back from Glen's just in time to hit with monsoon rain on the way to the barn to unload, but on the last mile sun came out and it stopped, yep I am living right! Breach27 I picked up you a Tan cover when I was out there a little over a week ago, no rubber rope and just a few rust...

Welcome from Kansas, don't forget the KAMO rally this fall. http://www.steelsoldiers.com/showthread.php?130465-2015-KAMO-Rally

mikey and I both went to HD today him in PA and me in KS and they (the FS codes) are no longer in their computer, they were in it last fall but now gone. We were both wanting 24087 semi gloss of 60's MV's. Came home and spent 45 Mins on the phone with Behr Tech assistance and they were no help...

The Dave's will be out there in the AM after we do a quick PU at Riley, just hoping the storms aren't too bad but maybe with all the fill you added it won't be too much of a quagmire. I don't want to dig out another boot!

This might help http://www.steelsoldiers.com/showthread.php?59799-Paint-Codes http://www.rapcoparts.com/manuals.html RAPCO sells it by the can

This might help http://www.quickstart-ether.com/support

DA= Dual Action Sander

He posted this last year and hasn't been on the site since.