Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Bob if that is your trailer in the picture and you want to use Rapco's CARC substitute 383 brown, 383 green and 911 flat black all listed on his page as current 3 color pattern http://www.rapcoparts.com/padenew.html
For me it is the dualed XL's it looks and drives great, with that being said my buddy has the singled G177 and it drives great also but just doesn't have the meaty look to it. I did switch my 818 from NDCC's to G177's and it really made for a big difference for the good in the way it rides and...
Ben Hur made all kinds of Military trailers. You could try http://benhurtrailers.com/index.htm but doubt if they have WWII parts. Sometimes John at Midwest Military gets some you could drop him an email http://www.midwestmilitary.net/index.html
CCKW has a pretty good data base on them...
You can move the 146 without air, no problems to get it off the goose neck. Do not go hauling it down the highway without air, could result in very bad PR for this hobby.
Since you do not have air you will need to chock the rear of the trailer wheels really well so when you back the 275 it will...
I went ahead and started it here. http://www.steelsoldiers.com/showthread.php?110572-Iola-Vintage-Military-Show-swap-trade-need-List-9-11-Aug-2013&p=1394093#post1394093
Starting a list for Iola Wi, show 9-11 Aug 2013, I have medical cans, litters with canvass nylon or net, litter racks(saw horses) three of duce boarding ladders one is spoken for,feet for the Ibis Tek tow bar and a couple hundred pounds of military nic-nacks. I should be up there the evening of...
This is a great step by step with pictures and tool list for the front that Banshee365 did years ago. http://www.steelsoldiers.com/showthread.php?8460-Front-axle-seals-and-boots-stepXstep&highlight=front+rebuild
doghead you pointed us in the right direction for draining but no procedure for flushing and cleaning. The TM states to follow the directions on the "cooling compound kit" which turns out to be 6850-00-598-7328 (Compound, Cleaning With Conditioner and Inhibitor for Engine Cooling Systems...
If you are going to the Iola show next month I can bring some up, 5 bows and 10 staves, correct ?
Email sent
I will be up there the evening of the 8th and leaving mid morning on the 11th.
Registration number on hood is not something to worry about as hoods are swapped all the time, but when you found the Vin # on the frame where exactly is it? The only reason I ask is many folks in the past thought they had it only to discover it was the part number for the frame, not the Vin...
Most likely just being lazy or not up to par, they are used to folks walking up with the color card and then just punching in the #'s off the card.\ It is just listed as 24087 in the FS section, no color name on any of the FS colors just their FS code numbers. When I have seen the screen it...
Big thanks again to juanprado , went out and got a qt of FS 30117 earth red and sprayed it on this morning. Just needs a couple of weeks of sun to calm down a little.
ichudov if you have descent carc as a starting point and you are doing a 3 color "Nato" 2gal of the base green, 1gal...
They are under federal standard section and on some paint computers it is under federal standard "new book" the code for semi gloss OD 24087 That is the code, rest are flat base with WWII OD 34087, Carc Nato colors are 383 green code = 34094. 383 Brown code= 30051, 911 Black code= 37030, 686...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.