• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. MWMULES

    Truck mounted shelter grounding questions

    quickfarms on one of my 1961 146 it is on the right front corner the other is an hour south but pretty sure it was in the same general area. The M109 it is below right rear reflector. Both of them are nothing more than a bolt sticking out with washer and wing nut.
  2. MWMULES

    Recovering two M923A2's from Ft. Riley tomorrow and headed South to Oklahoma

    If you got the rebuilds there is no BII on them and not a lot of fuel. I would go west I-70 a couple miles to the wally world/cracker barrel exit & fuel up. Then head west about 45min to I-135 south you will pass with in a mile of BFR it is just east of I-135 less than a mile and is the first...
  3. MWMULES

    Truck mounted shelter grounding questions

    Yep steelandcanvas the breaker box is set up correctly like you wrote, this is a 2005 built shelter with modern breakers and wiring. The ground comes in from the plug goes up to the breaker box then has a green ground that goes down to the grounding lug which turns the whole metal frame work of...
  4. MWMULES

    KS, AR, MO, OK, KAMO Rally parts wanted/for sale/swap thread 2013

    Dave is sailboat fuel the same as kite gas? I have some NOS AO42 motors in the crates,but will not lug them down there unless some one wants one.
  5. MWMULES

    Truck mounted shelter grounding questions

    Ok do you guys with M109's or shelters use the grounding lug and run a wire to earth when you plug into shore power. The reason I ask is I just finished rewiring my box from 60 amp 3ph 208v to 30amp 1ph 110v. When I have shore powered other mv's in the past they were sorta grounded by Mil metal...
  6. MWMULES

    Starting my M146 Build

    I have used Sealbest white elastomeric roof did my M109 roof years ago and it is still good took two 1 gal pails to to my 146 roof used only one pail to do two coats on the 14' box in the picture and have a little left over. I brushed the seams then used a roller with long handle to apply and...
  7. MWMULES

    KS, AR, MO, OK, KAMO Rally parts wanted/for sale/swap thread 2013

    Am I the only person that is going to bring anything to swap/trade? rpwpyw no worries it is yours, I have gotten a few more other styles of ladders that will work for anybody else.
  8. MWMULES

    Greeting from KS

    Welcome to the site from the eastern part of Kansas. BTW I have no MEP knowledge.
  9. MWMULES

    Starting my M146 Build

    Putting rubberized white reflective sealing coating to the roof is one of the best things anyone can do a trailer or box you are planning to mod into a camper. It is amazing how much it cuts down on the heat load. I just did the top of the box and the roof of the cab Friday, really wasn't...
  10. MWMULES

    BFR Metals, Salina Kansas, a Goodie Hole

    KCCLAY and I went out to BFR to snag some parts and nick nacks, he has gotten in a fresh supply of M101A2 trailers. Since I had a working camera got a picture of the air ride seats, he has a few to choose from!
  11. MWMULES

    Can "clearance lights" be used as turn signals/flashers?

    I was thinking about this also and have opted to go the Euro route and I am adding the "lolly pop" lights to my trucks. Got some take offs from Glen at BFR at a great price.
  12. MWMULES

    Thanks to Rkrug and his Father

    I has driven out to Ft Riley to inspect a M923 which I did not win. As I got in my truck to follow the GL guy over to the lot my truck would do nothing, DRT, no click nada. Rkrug and his dad were there for a pick up and went into action and offered to jump push or whatever was needed to get me...
  13. MWMULES

    M151A2 FAV Restoration

    I am not sure where they put these together at, but every roll cage on the D's look like it was the first day on the job and the guy had never wielded before! I know when Artillerydan restored his he spent a lot of time grinding and re-wielding his.
  14. MWMULES

    USMC 5 Tons

    CARNAC I thought that also, but it now appears if they were turned in for reset at an Army run site they are released with a W prefix. All Marine trucks that I have seen that have come out of RSMS in Ks. have DTID:WXXXXXXXXXX , Weird!
  15. MWMULES

    PE-197 Genset Help Req'd.

    The 197's had been sitting on the GSA lot for a while and have been waiting for them to come up and the 75 got added to the lot was an extra bonus and at $100 for the lot I am very happy. I was thinking the same as you, but tag says 2.5 kw. Going over to gbooth's man cave this afternoon to...
  16. MWMULES

    What did you do to your deuce this week?

    Finally got around to painting the box to match the truck, added a pintle hitch with backing plate to the front to push a S280 on a mobilizer dolly.
  17. MWMULES

    KS, AR, MO, OK, KAMO Rally parts wanted/for sale/swap thread 2013

    rpwpyw has dibs on it, sorry only one of those I got, but if he passes it's yours.
  18. MWMULES

    PE-197 Genset Help Req'd.

    Pictures of the 197's one has good sheet metal the other not so good. Just what I need more projects, can't wait to get to work on them.
  19. MWMULES

    PE-197 Genset Help Req'd.

    Reviving and old thread thanks to GSA I am the proud owner of two PE-197's like macjeeper has and two PE-75's like Boatcarpenter mine have the round gas tanks. Tried one of the 75's and it fired right up had the tank off to clean it out so don't know yet if it will make electrons or not. Will...
  20. MWMULES

    KS, AR, MO, OK, KAMO Rally parts wanted/for sale/swap thread 2013

    rpwpyw I used the wife's camera here is the ladder other pictures are of the brackets that hold it on the back of the 109 box.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks