• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. WillWagner

    Found these in the oilpan

    Looks like extruded material, like a bushing/bearing. Cut the filters apart and lay the media out flat to see if there is more stuff in there. If there isn't, it's most likely from a prior failure. That sample is VERY small. It's most likely leftovers.
  2. WillWagner

    Diesel Mechanics advice please

    Start with easy things first.
  3. WillWagner

    Diesel Mechanics advice please

    800 series 5 tons are known fir having junk fuel lines that cause air in the fuel, maybe the 900 series have the same issue? I'd start by looking at the lines and switching valve/tee for the suction line.
  4. WillWagner

    valve adustment signs and symptoms

    Sounds like a smith corona typewriter, If they are out of adjustment too bad, it can smoke lots, not be so smooth at idle, just sounds kinda ratty. After a correct adjustment, you'll notice better power, better mileage...like THAT matters :roll:, better throttle response and it'll just sound better.
  5. WillWagner

    looking for info on who is selling parts for my 1009

    :ditto: on the above
  6. WillWagner

    Plug came out

    You should leave coolant in it. It rusted through. Proper antifreeze concentration will stop whatever damage that is happening, but the rust pits will still be there.
  7. WillWagner

    Falls on its face at 1800 rpms

    Does it happen in every gear? Check to see that it is getting full throttle.
  8. WillWagner

    Turning up a NHC250

    Maybe it's cause they use the metric system up there?
  9. WillWagner

    NHC 250 needs more power

    Wonder why the site keeps doing that?
  10. WillWagner

    runaway engine?

    That's 4 :razz:
  11. WillWagner

    Turning up a NHC250

    Depends on which pump you have. Injectors are easy, pull V/C, loosen adjuster, take the hold down out, remove injector and reverse the procedure for assembly. It's assembly that messes people up. Why you wana put injectors in it? Also, turning up the fuel won't do anything for top end, that...
  12. WillWagner

    Who has but a 4BT in a cucv ?

    If it was a Frito Lay or Granny Goose van, they will be at around a 5 degree tilt but it'll still fit. Lots more room too.
  13. WillWagner

    NHC 250 needs more power

    Get rid of the 53's Depends on which pump you have. Take a pic of it where the throttle lever is.
  14. WillWagner

    hydraulic oil

    Hydraulic oil works good!
  15. WillWagner

    Canadian specs for the 250 cummins what a difference

    Setting up a pump is an art. What one person does can vary to the next. You can do it and get close, without a pump stand, if you use all the correct springs, shims, throttle shaft for the pump, etc. The stand drives the pump, not the other way around when it's on the truck. There is easily 10...
  16. WillWagner

    engine shut down problem

    Welcome, please try to post as you would talk to someone in front of you. Is the in-tank pump running? Has it been sitting for an extended period of time? Possibly a filter issue.
  17. WillWagner

    Changing my engine oil M813A1

    Yup, 15w40.
  18. WillWagner

    Another new guy

    Howdy!!
  19. WillWagner

    Alternator Rotation Direction

    What if you stuff isn't close to an outlet to plug it in? Not all equip is garage trained, my deuce constantly makes it's mark where it sits. I've tried to train it but it's stubborn, so it stays outside. Bad, bad deuce!!
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks