Search results

Hey thanks for the help, found the adapters with 9/16 studs online at egay, AL $130 and FE $235 with shipping for 2. Anybody know of a cheaper set?

So back to the original question, has anybody mounted HMMWV wheels on a M880 series truck yet and got pictures? Bob where can these 2" spacers be found, purchased? Thanks in advance, Jim

The only drag is you have to get 3 kits @ $82.21 each plus shipping. I hope one of you Digital camo guys get a kit and tries it out. instruction sheet http://www.aervoe.com/techdata/900-903%20IM.pdf

I am pretty sure it is a M416 cargo frame with 416 fenders that has a "home made" top added to it with a mil box bolted on. The way the fenders are attached is not military either. The data plate would have been on the cargo box that was removed. The military 416 flat bed version is a whole...

Don't know who made them but believe they were made for the DOJ, Dept of Justice as response vech.

After looking for the last 2 years for a proper Duce boarding ladder, I bought one of jwright's van ladders. He had them new in the crate at the MVPA convention for $80, I had seen them before on 6ton vans at Ft Riley at the reset area. I used a 1 1/2 hole saw to modify the tail gate, 1 1/4 or 1...

In the late 80's and 90's desert storm we were issued orange water jugs like you see at home depot one per track, we just rattle caned them sand. We also got issued 1 per track a Nissan thermos best one I ever had and still have it, the spoils of being a PSG!

sandcobra164 do you still have the link to BFR's writeup? I did a search for it and no joy. Thanks in advance.

Down load the operators manual, do all the before operations checks before you fire it up, if they let you. Do the maintenance as most of these trucks have been sitting for 6 months or longer. Take the right fluids to top everything off. The last thing you need is a 20T truck out of control and...

This year was not so good high temps hot tarmac and MVPA national last week = small turn out of MV's. A few of us hardcore still turned out and of course ELMO was there doing his job, selling dog tags!

Nice work, what type of AC do you add to them.

Dave, Rick, Gregg and I just dropped off some of our trucks off out there @1600 hrs. Most of the planes were still in the hangers or will be flying in later today. Two C47 were already there with one of them being a spooky gun ship. See you all tomorrow morning. It is so hot the old tarmac tar...

:ditto: Yep it goes on the passenger side, or at least all the ones including mine are mounted there

I am going to try and get the 5 ton out there this afternoon.

2Deuces wild now that it has been on there for a year did it hold up with only the 2 bolts? I am planning on mounting one like yours this week end and was wondering if there has been any problems with it.

I rather be there, heat index this weekend will be 100+.

Last year we had 40+ MV's hope to have 50+ this year Commemorative Air Force- Heart of America Wing Join the Heart of America Wing of the Commemorative Air Force in "Honoring Our Heroes" Veterans and active duty military personnel will be guests of honor at the CAF annual...

I am pretty sure it is called "rubber rope" and there used to be some listed in the classified section.

Our 1009's are cousin, same unit, truck #103. I picked up mine a couple of weeks ago. Runs great but came without spare, seems like all of them had their spares pulled. After I cleaned the fuse block it has been running like a top. Been driving it every day back and forth to Topeka for the MVPA...

Man wish you were closer, mine came with a heat welded high top. The side stakes were just bolted in at their highest level. They just didn't add any to the back flap for some reason, I am looking for a standard top. I was hoping it was just sown on and I could pull the stitches and have a...