Search results

Picked mine up off of ebay. i dont remember the years but it fits blazers and pick ups from the 80's. Used grade8 bolts and nuts and had to remove the bumper supports and tie downs (some of it, not all) but didnt have to drill a single hole. $15 + shipping, might try a local pick and pull.

RE: 6 tl Looks like sprucemtsurplus.com has them for $80 dry plus shipping. I could handle that. Optimas are super but with an IP rebuild in the future $500 is steep for batts. Contacted Deka and their midwest sales guru stated that they dont have 6TL's with blemishes. Right. Group 31's is...

I currently am running some Autobone/Wallymarts that are were the biggere batts (750 cca). The block heater died last week and I found out how well the GPs are working w/o help. I had to shoot the the air cleaner with ether. So with that Im guessing new Wellmans (2.5yrs old) and a couple of real...

Had a dude sell me a blower motor on ebay that listed it as a "arctic kit" blower motor... Maybe it wasbut it spun backwards from the original motor. Cest la vie, even if the resistor died the motor will spin on its highest setting like was stated. Thats how mines been since last summer. I...

RE: Make offer on MTs (TAKING UP VALUABLE STORAGE SPACE) what size?

This might be a shot in the dark. The goofy bulb that lets u know the alts are working or not have to be good for the alts to charge the system. Does the "wait" or "W.I.F" bulb have to work for the GP system to heat/operate? I hope thats not too "newbie" of a question. I was told that the water...

I dont remember the 1028's designation (shop truck I assume) but I'll bet its similar to all the other truck set ups. I'd venture a guess if u had popped the hood it comes from the driver sideand from the stupid dubbl pulley set up on the power steering pump. Get that tight and then get the...

Had a reuild dude till me theres a fiberous seal inside where some kind of rods or some magic pump fairies beat up and down. After 20+yrs the ring hath died, this was a common prob with a simple fix: rebuild said pump with a better rubber seal. One shop quoted me $960 to pull out, rebuild and...

Use stanadyne fuel additive? Hadnt heard of the stuff. Ive used diesel kleen before and thats really it. Return lines really dont look bad and are plyable. I took a couple of thereturn line tubes off and shot some carb cleaner into the tubing and injector nipples. Truck ran fine yesterday...

(Taken from a prev post. I didnt think the subject matched the question and would be hard to find if searched so I gave the question a new subject) So.... for the past few months I'll drive the blazer around and occassionally I need to unscrew the the return line check valve and blow it...

I wasdriving back from valpo one night when the truck sputtered and the lights went dim. Almost died out completely. Thought it was strange but it was momentary and responded normally for the rest of the drive home. Shut it off and went on inside my house. I came back out to start it...

So.... for the past few months I'll drive the blazer around and occassionally I need to unscrew the the return line check valve and blow it out with some choke and carb spray. A bunch of tiny coffe ground debris comes out and I then reinstall and along my merry way I go for awhile. Then the...

RE: Starter bracket bolt size?? heat shield gone a long time ago. None the less the starter bolt snapped AGAIN today. Luckily, close by chevy dealer had said 2 bolts on hand. I am tired of replacing those cheap chineese bolts. Menards is packed with Black Friday fools so the bolt bracket will...

I think junior and me and mom and dad would all have a come-to-jesus meeting. Call on your neighbors and tell them what happened first and what youve found. Give sonny the chance to confess. A little presure might break him and learn a good life lesson (aint we all been there in that hot seat?)...

Ive been snapping starter bolts this past week. i didnt realize the last time it had gone into a shop the mech hadnt returned the starter bracket (That holds the rear of the starter up). Probably thought it was extra. Ive since procured one but have had a heck of a time trying to figure out what...

Would be intrested in hearing if the injectors (marine) made a dif. For the price Im curious. What about pulling off the current set and cleaning them? If I do it will I need to replace some O-rings or other gaskets?

My friend takes his camping. The rangers at the state park dont bother to charge him cuz they think hes with NG.

leaky switch in pic is the round "thing" w/ the red and green wires?

Glass plunger/one way valve is located inside the return line injector you took off. IF you take a small allen and try to push through, it should stop inside the injector, against the bead. The bead should slide freely unless some dude may have already busted out the glass bead. No biggie I...

I had my windshield replaced a little over 2 yrs ago and get a slow leak on the D side lower corner. Try this to track it down: Remove the dash, If nothing else it gives you a chance to clean the area up and you'll probably make $12 cleaning up all the loose change behind there. Sprinkle talcum...