Search results

reading back it seems to have been established that the differences that haven't been tested (others were tested to make no difference) are: -lower compression (= higher volume of air from turbo accepted without increasing exhaust temps) -different rocker arms (a higher ratio would = more...

list right here then: damageinc2785 = 4 hubcentric adapters

I was going to put together a group buy as soon as I got mine mounted to show everyone. if people want to start putting names in the list for a group buy then I'll work it out with the machinist.

the set I have are for 10 lug budd rims. they can be machined with hub centering ring for another 15$ per wheel

total cost with buying new studs and nuts rather than salvaging them was ~1250$ for all 6 that includes what i paid for shipping

nice seup you have there bones, I've been surviving with a clark 110 welder for the last 6 years, it has served me very well. I'd actually like to get one of there newer 110 spool gun mig welders.

how about converting to 10 bolt and using commercially available tires and wheel that you can get locally including retreads?

I bought my parts through mcmaster-carr. made sure everything was rated for hydraulic fluid.

napa won't have the wheel studs to me until monday so it will have to wait till next week. and if anybody is interested, I saved about 30$ on the studs by going into the store rather than ordering them from napa online.

watching a toddler mostly, replacing a broken faucet that flooded my house while I was away on vacation. the usual

passenger side front fender if it is in good shape.

been so cold and I don't have a shop - I may get around to doing some of it this weekend. I have all the wheel adapters, just have to press in the studs and bolt them in place.

you can add an alchohal kit to the compressor - there are a few recent links with pictures. pretty simple setup that draws some of the air for the compressor intake through alchohal. your vent may actually be clogged by something other than ice. I would remove and inspect.

I was going to mention a wound spring starter. startwell covers that

i would just get the cable actuated bleeders that go for ~$10 more air capacity is always good, but you may want to install a regulator infront of it so that it doesn't start airing up untill the system has reached 60psi

I might be interested in selling my bows, haven't decided yet. I'm down by solomons island tag restrictions really aren't enforcable because of the wording of the paper they make you sign. it allos the vehicle to be driven for "other uses" while trying to make it sound like it actually...

historic tags and progressive unrestricted personal use insurance. says M35A2 right on my insurance card :) I'm also in SOMD - where are you located?

OD Iron has the 6,12,or 24v for 39$ each

same basic setup ODIron has - but od has it in 24volt I tried using a single motor to run both wipers but it didn't have enough juice. works fine for a single wiper. I bought a 12v-40v pulse width modulator to vary the speed of the motor without reducing its torque. can get them on ebay for...

too cold and snowy now to do much more, but i snapped a picture of it sitting inside the rear wheel. This was the first part for a fit check to make sure all the dimensions worked correctly.