Search results

The vent cooler was not capped off but all other fluids looked good when flushed. I will probably end up swapping covers to keep it OEM. Thanks!

Hello, While changing the fluids on a new to me 2012/M1167 from GP, I found oil in my rear diff that looks like a milkshake. I also noticed that the vent line was also removed/hanging. I drained to diff and waited till the next day to see is the cooling system is leaking. Sure enough, I...

Hello, If the truck was a runner and then sat in the desert without the cdr/air cleaner, should the motor be torn down or is there a process to flush? The truck I'm looking at has the hood in place giving the engine some protection. OR should I just change the oil /replace parts and go for it...

Barstow auction 2/8/23 Submitted to TSC 2/20/23 and still waiting! previous euc in 2022

Makes me think we have some shills. First one was a 17 rebuild that they dropped the pan and removed parts. I was thinking 500 in parts. Just wow...

Thats a good picture of your roof plug. So at 46' it goes under the overlay and above the roof right?

The truck looks great and got me excited for the two I am waiting for! How long did the EUC take and was it your first EUC in the last two years?

Hey guys, I won 17 alternators that have been subjected to the elements. They need to be picked up within 7days preferably by someone in Reno since the roads are a mess/closed? Please dont say I can then cant. Let me know how close you are and when. Thanks

Same story here...I also need a pallet picked up there??? If I end up driving up, I will let you know.

The pull start saved me several times when I had bad blinker fluid!

Don't chance it to save a few $$$... https://genuinehumveeparts.com/product/5743238thermostat-65

Same dates and the clean SF97 arrived yesterday 7/13/22. One month shy of a year this time.

I called three months ago and was told, "it's in the next batch."

.......9/8/2021, picked up Feb 6th and nothing yet. :unsure: 3rd EUC in 5 years :mad::mad:

Same here. Picked up at MCLB Barstow around Feb 6th....

Same here, picked up on 2-2-22 from mclb. "It's in the next batch."

I had this in my 1152 and the four wires ran to some type of fuse block behind the starter and on top on the frame rail. PIA to remove.

For the 6.5/A2, OEM for me... https://genuinehumveeparts.com/product/5743238thermostat-65 cheaper at macs https://www.macmotors.com/Product/HUM/5743238

A couple hours sitting in the seats, not bad.

For me it was a bad cartridge seal. Excessive oil in the intake + compression in the crankcase. I pulled the turbo and leak tested it with water. The water freely flowed through the seal to the oil passage. $150 part