• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. donalloy1

    Delco 27SI Type 200 vs. Type 100

    Need to replace port side alternator. Gather from those in the know that direct replacement is Delco 27SI. What I did not know is there are two types 100 & 200. Type 200 being 100 amp and 100 being 80 amp. Question for those in the know. Can I substitute 100 amp type 200 for type 100 80...
  2. donalloy1

    M1009 Bumper Numbers

    CARNAC, Tried going to 2012 VIN thread so I could send you my vehicle information. Would not let me add to thread? Where should I populate information so you can check for me? Thanks in advance, DMLII sends...
  3. donalloy1

    M1009 Bumper Numbers

    Will go to to "2012 VIN" thread and hopefully figure out mine? Outside of Bumper Alpha-Numeric strings. What do the Alpha-Numeric strings on side of vehicle mean? I am assuming that is vehicle ID only? Example mine has NFOH3K on sides behind doors amidship forward of wheel wells both sides.
  4. donalloy1

    IR lights for a CUCV

    Outstanding 319, thats all I need to complete mission. As for getting T-Boned and legal challenges. In my area all are driving Prius's. When they T-Bone the Beast it will hurt them more than I!:driver:
  5. donalloy1

    Self Exciting Alternator

    They need at least 12 volts input and at least 250 RPM to excite is my understanding. Am I getting warm doghead?
  6. donalloy1

    IR lights for a CUCV

    I am with you CycleJay. Have added to my wish list also. They look like they have unique terminal landings on them? Anybody know the part numbers/manufacturer of those terminals? Have never seen them before. Above and beyond that. Does anyone have a link for proper wiring of these...
  7. donalloy1

    Gen 1 Light - Overcharging

    Found below troubleshooting guide last night and went to town this morning. All checks out good after correcting poor contact on positive terminal for battery nearest firewall. Always start with the easy stuff. Gen 1 light still pulsates dimly but not a steady bright red when in throttle...
  8. donalloy1

    M1009 Bumper Numbers

    My understanding is Unit/vehicle ID information.:driver:
  9. donalloy1

    Gen 1 Light - Overcharging

    According to TM I need a new Alternator. So much for cheap fix. Will look closer in morning with sunlight on my side.:cookoo:
  10. donalloy1

    Gen 1 Light - Overcharging

    Gen 1 light bright Red when driving? Volt meter in overcharge range. Time to get happy with TM's. Any hints from those that have been there before me. Will dive into to TM's and see if I can figure why she is not regulating properly? She brought me and son home safely. Its all good...
  11. donalloy1

    Another Blazer project!!

    Did you find a rear powered assembly at wrecking yard or accomplish by other means? Afraid to operate mine! Its up and I purposly keep it there so I do not get stuck down. :deadhorse:
  12. donalloy1

    Ignition Key Position

    recovry4x4, mine does not want to rotate backwards. tried when first purchased and would not go? will try again. add a little panther pee to assembly? i assume if spoken by you it should do it?:deadhorse:
  13. donalloy1

    Ignition Key Position

    Have my Stereo off Ignition hot. Had a feeling should not use Stereo without engine running. Because of above stated reasoning. Really appreciate reply's! Will need to pick up current elsewhere so I can listen to music while Beast is not stirring. Thanks again for reassuring my suspicion...
  14. donalloy1

    Finally got the Roof Rack M1009

    Roof Rack looks ultra clean. Do you have a manufacturers part #? Also like center console. What did you derive that from? Old med kit or something? Please inform. Thanks
  15. donalloy1

    Northern California East Bay Area CUCV Wrench day/Meet & Greet

    E, I am so interested! What do you say we wait for more to reply? Saved original reply's so we can attack from that angle also. Suppose if we can get 6 or more hits. We should propose a date. What do you think? DMLII sends....:jumpin:
  16. donalloy1

    Ignition Key Position

    Does keeping Ignition Key in on position while not runing engine on CUCV's pose problems? Such as GP circuit loading or other potential concerns. Please excuse me if this has been covered before. Did not see a thread on this topic. Look forward to input from those in know. Thanks, DMLII...
  17. donalloy1

    Doghead relay mod not needed after July 1985 production

    I have an 86 09 and it malfunctioned a couple times. All good since relay mod. Thank you so much for support SS!
  18. donalloy1

    M1009 fuel consumpation, what is your MPG?

    All stock here. Fourteen mile round trip commute daily mixed speeds mostly freeway. I get 15-16 mpg. Keep speedometer below 60 mph. Wish I could get more but it is what it is.:beer:
  19. donalloy1

    What have you done to your CUCV today/lately? - Part 1

    Installed new steering stabilizer ( monroe ). Installed new driver side seat cover ( smittybilt molle ). Squared away front leafs and torqued u-bolts to specification. :beer:
  20. donalloy1

    My first M1009!

    Outstanding wisconz! Please let us know how you proceed in detail on veggie conversion. Would like to entertain myself when time is right.fat lady sings
Top