Search results

priming the whole truck will help adhesion and help to stop rust but it really depends on the condition of the current paint.

[thumbzup] good work, fork lift is the way to go on a deuce. P.S get a hoisting hook for the forks makes it a lot easier.

I found something at my local hydraulic shop that might work very well for the heater ducts on MV's here's the one I thought would work best http://www.flexaust.com/content190.html but they have many different types so try looking around on the site maybe there's one I missed.

mount one and two do not look right I just replaced mine and they are supposed to be thick like 2 inches yours look very flat but yours could be different then mine(mine being the new and the old parts).

RE: Clutch pictures well whats killing me is they did find my clutch ie the one that came off my truck but they miss adjusted it so I cant make itwork, ordered a new one from saturn surplus waiting to hear back from jay on the total.

RE: Clutch pictures Crazyguyla thats a LDS clutch not quite the same. ace no one hub is longer so it only goes one way.

And I will say once again it was dry under the trailer :D

I would say 24084.

GMA does

it's not a new star it's a Illinois Auto Truck Co., Inc., crazyguyla the multifuel engine manual covers setup and adjustment of the clutch but only for the old 4 finger style plate.

houston we have a problem I have the right pressure plate numbers match and it looks perfect so I really really need those specs now !! here's a picture comparison number on clutch is 19207 assy-12357025

here's something what if you don't have a credit card for paypal? can I send checks ? cash at aberdeen?.

no go the fingers dig into the input shaft sleeve.

bigmike two things what are you useing for primer and how dry out side was it? and to wipe down use mineral spirits wont react to the CARC beware acetone eats CARC.

pull the speedo out and turn the input by hand you can get it up to about 10mph that way.

I need the specs or TM number that shows how to adjust the finger height on the 3 finger clutch for the M35A2.

thats my thought all the abrasive blasting I do leaves a nice "rough" finish for the paint to stick.

My shirt (same one I wore last year) says SteelSoldiers right one the front.

rmgill would a M172 work 35ft long one in NY state for $7500 heres the ad 1964 M172A1C 25 ton Trl. Excellent overall condition Matched Bridgestone 11.00x15 radial tires Has ramps & wheel covers Can be used with a 2 1/2, 5 or 10 ton Tractor Brakes perfect, Deck and paint are excellent

sorry to hear that bigmike good luck.