Search results

My sprag doesn't work in this sub freezing weather and I can't get around without the front axle. It is adjusted fine and works in reverse. If I start from a stop, it works (sprags catch). The sprags will not catch when in motion. There are no air shift transfer cases in my area (within...

Mangus, The external sprag linkage only engages the reverse sprag. The transfer case is, by default, in forward drive. When the tranny is moved into reverse, the linkage moves the reverse sprag into gear. When the tranny is moved out of reverse, this force is removed and a spring in the...

FYI. You do not have to start in 1st gear with the sprag transfer case.

This is from the reo oa331 engine and clutch overhaul manual: "Using constant current control, set at 26.8 each (??? mA), voltmeter reading must be 18.4 to 19.6V with unit in water at 200f having minimum flow of 10fpm past the unit and with power on form a minimum of 6 minutes." Not easily...

You can buy adapters to convert to an H4 halogen bulb: This one place: http://www.rallylights.com/hella/H4.asp If you do a search, you will find many others, some are cheaper.

It is coming back out. I will try to use the sprag/front section from one transfer case and the main section from the original transfer case. I can get a complete sprag transfer case locally for $100 and may go that route if I can't piece the two together successfully. Or, I can always add...

Well, the shift fork apparently has a hole which mates with a set screw on the fork so there isn't any adjusting to be done. The detent seems a little weak so maybe that can be improved on. Otherwise I will have to put the good sprag drive on the original transfer case... What is a fair price...

I just swapped out my non functioning sprag for another sprag. The good news is that the sprag works but the transfer case slips out of low range on occasion. It seems to do it under low load such as between shifts. I have noticed that it takes very little movement of the lever for it to slip...

The p means package for sale. Hot Rod, I may take you up on your offer.

There is an adapter for the defroster hose. I just noticed that there is a "p" suffix on the ebay heater part number but there isn't one on the corporate website's part number. I'll contact corporate tomorrow and see if it is significant.

I ordered up one of these. Compact and cheap. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4561052064

I can convert it into pdf format. Do you have it in electronic form?

Deuceman, where are you at in SE SD? I am in Yankton. I may be interested in some 1100 tires.

I was doing a search of this site on an unrelated item and found a post stating that there are two bolts hidden behind the flywheel.

I just finished my 4x4 conversion and licensing/insuring in SD. 1)According to SD law: "Rebuilt vehicle," any motor vehicle, trailer, or semitrailer that has been rebuilt by the addition or deletion of assemblies, subassemblies, parts, or component parts so that upon gross visual examination...

Isn't a misnomer to call the non-turbo detroits supercharged since there is no way to build any boost? There are no exhaust valves, the air just flows right thrugh the sleeves and out through the exhaust pipe. With a turbo it could have positive pressure. I think that the correct term is...

From a 1971 motors manual: plain 6-71 has 219 HP at 2100 and 574ftlb at 1600 no load governed speed is 2150 the 6-71T (turbo?) has 236 HP at 2100 and 630ftlb. I've read that it is dangerous to go above 250HP because you can't get the heat out. No experience, though. Assuming that you...

This is the 3" nut holding the hub/bearings onto the spindle. I need to get the hub off to do some brake work....

Where is the cheapest place to get the axle nut/spindle socket? Local place wants >30 dollars. Are the front and rear the same size nut?

The reo six in the deuce had provisions for a tach to be driven off of the cam. The only way to derive a mechanical tach drive off of the gmc is to get a distributor with a tach drive or an adapter for the distributor. Both are old time racers items and hard to find if at all. The first thing...