Search results

I can get u a solinoid And tell you how to install i do it every day.

This is so no big deal a good gooseneck and your 250 Will do the jab with no problem. I have hauled everything w my 2500hd including a 16000 lb motor-grader. I say aslong as you have good trailer brakes an good tires GO for it!

I will be there friday morning and there aint a piece of iron I cant run got a lot of time in the operators seat.

Lord willin I will be coming down on Fri mornin, I will be drivin the bobber down from Walton Co and I can help however directed. I will be bringing a good load of wood lord willin

The military had the duce built to do what they need it to do, I modified mine to do what I needed it to do. I like em bobed full sized lifted stock.... I like em. Just so happens I can only afford one and I want it drive able, I drive it 3 or 4 times a week cause its easy.

Some people have a way of making their opinion overbearing!

My drive shaft is 7 inches longer than stock it was 137 dollars to have it lengthened and balanced.

I measured from bumperetts to center of rear axel when truck was full size then cut three feet exactly off the frame. I then re measured my distance from rear to center of axle this gave me t he same distance from rear of truck to center of axle. Some thing like a 60 40 ratio 60 percent in front...

Ill b at the Ga ralley lord willin or come up any time u would like to n check it out im in monroe Ga thats half way in between athens and stone mountain on hwy 78.

The rearend on my truck is 7 inches tward the rear.

Here is mine before and after

Box is 9 feet and they are 1400 20 michilens

I have 24 volt system with a converter for all my 12 volt devices.

There is a guy who built the extended cab duce he used drop down r v steps mounted under the cab could kill 2 birds.

Who all has shortened or dobbed m35s, and lets see pics

Thanks man I love it it tucks everything up i know it requires moving the tank to the bed but i like not worrying about it. I built my steps out of 4 inch x 1/4 wall steel gas pipe with weldable 90 degree bends so i can bump them on whatever and smile>

Scrapped the whole deal. I have spare tire carrier and some bump stops that is about it I figured someone would need em but i needed the money.

Lonsome what parts are u after?

Thanks for all the compliments guys. The drive shaft is seven inches longer, what we did is remove the tailgate section and cut out one three foot section of bed. Before we started we measured from center of rear axel to back of frame once we cut the frame it was put back the same distance that...

I wana post a video but I dont know how!