Search results

I'm **** glad I live where my township is not even zoned I can stackem a mile high if I like. It is a ashame that in the land of the free we can not do with our property as we wish. I suppose when they get you in there sights they will not back off of you and turning them in or suing them seems...

I don't exactly agree with more engine rpms lessen engine wear. I think the multifuel spins to fast for its own good, too many harmonic vibrations that send things flying. Little motor made to move a big load. Every engine has its sweet spot or max torque at a certain rpm per its dyno results...

Tractor supply paint is made by valspar, I have used TSC hardener in Valspar enamel from lowes, they can custom tint it for you

Es ist ein Gas-Auslauf sicher bezeichnet. Schones stuck. This probably way off but I tried.

I've heard 10psi is what the DB2 IP needs to operate correctly

Gas can spout I always wondered what the proper name was. LOL we just call em donkeydicks round here.

I carry hand tools up too 1 1/4'', screwdrivers,prybars, jacks, wood blocking, spreader bars, about a mile of chain it seems like, 6 snatch blocks, cutting torch, air hoses, 1/2 drive impact and sockets, 5 gals of water, 1 gal motor oil, grease gun, blaster, towbar, various pins and shackles...

Its a 8.3L in a big truck don't expect much from it.

Removing seat back foam help a lot. I like the sleeping mat glued on the back then seat cover reinstalled I might try that.

On Radials I run what the tire says on the side off it. My G177's on my 5 ton say 110psi max so thats what I put in them. I have found with radials on my semi's that the tires wear alot better when use that rule of thumb. You will like those tires the difference between them and 9.00-20 bias...

I had a 82 blazer with a 6.2 and duel cherry bombs and it was alot quieter than a gas v-8. Put em on there I liked them. The longer the mufflers the deeper the tone.

They have ways of watching you I picked up 4 F14 wings on a flatbed semi few years ago that where complete but apart that went from Columbus Ohio to a Scrap yard in Toledo Ohio and the same nondescript car followed me the entire trip. I stopped a few times and low and behold same car few spaces...

I think napa stores order and stock parts on different tier levels for there target customer base. More urban stores have more automotive parts, some have farm related items and the 3 store close to me seem to carry a lot of farm and heavy truck items and one of them has a good supply of...

Ive never seen a plate that sandwiched in between pump and motor, not saying there wasn't any such animal but how would the pump still work longer cam rod or something. I've just used a smallblock chevy fuel pump block off plate easy to find in the junk I mean chrome section or you local...

Would that be the wrong time to flip the front axle engagement?

I would think that spin balancing would be the only option for duece tires but finding a shop that does it anymore is difficult, the method that works the best is spinning the wheel while it is on the truck. That balances tire, wheel, drum and hub all together. In the past few years with...

I like it that way, I don't think the tire size would be a issue at all with the front axle engaged if you needed it. IE mud or some other smiley surface.

No injector change needed. But the 6.2 heads are different they have a different injector angle will not clear the turbo you will need the 6.5 heads, if you lucky you might already have the short injectors the last 6.2 I did had them and the motor was out of a 93 military pickup. If your running...

Don't know if this is relevant but I have had a few older trucks get between gears and do that. I mean they where in a gear and the shifter itself slid between the shift rails and would allow the trans to get in two gears at the same time. My solution was to remove gear shift lever and with a...

I was thinking as I was reading that it wont steer or have brakes if not running then I noticed the tow bar. I like it