• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. cjtroutt

    Allis Chalmers Model 7000 diesel engine

    Try an Cummins 4BTA you can get about any thing for it adapter plate from DESTROKE.com & cummins has all parts avaible when needed.
  2. cjtroutt

    Uh, oh! Anti-freeze In the Oil

    Head gasket or liner oring & maybe Crack in Cly bore passage. oil cooler went bad it will be oil in radiator & allot of it.
  3. cjtroutt

    m1009 Replaced the starter now won't shift

    Pull the modulator out & use an Hand vacuum pump on it to see if it move if not replace it & get an fully adjustable one. But it sound like some thing Moore than Vacuum how is the trans fluid look & smell. Had some times an Th 400 govern stick or will have an effect on shift to. If you Have...
  4. cjtroutt

    Short in Horn system and request for help windshield washer pump

    I found all the parts at Advance Auto Parts in stock wiper pump rebuild kit around $6.00 & wiper & pump assy Under $100.00. When geting parts there make shur to order 1984 Chevy & GMC K30 Pickup or K5 Blazer I hope this help.
  5. cjtroutt

    Unloading my new M35A3

    Nice M35a3
  6. cjtroutt

    $55,000 quad cab bobbed Deuce

    Sweet M35
  7. cjtroutt

    Cummins 6BT in M880-Pitfalls?

    Find Dana 61 front axle & dana 70 rear out first gen dodge w350 it will have 3.07 gear set. your frame mount is the same as the 89 to 93 1st gen dodge. engine mounts to engine & rubber icl pad for the mount are still avaible from Cummins or Dodge dealer. The raditor is no problem look for the...
  8. cjtroutt

    Fried CUCV card pic and question...

    Radio shack has parts to fix it. I done 4 of so far.
  9. cjtroutt

    Ft riley cucv recovery today

    Nice Find good to see good looking M1009.
  10. cjtroutt

    Am I on the right track with this engine build?

    Dale I guess I stick with Tm or fuel tank says on her JP8 or DF2 only No mogas.
  11. cjtroutt

    "New to me CUCV" questions

    Warthog is right He has lots of knowledge. I done V lines & VRV MOD On my M1009 & just figured out that My trans was tired out Final clutch pack & seals was gone. 84 M1009 in DS Maintenance for Total rebuild Frame off. 86 M1028A2 MC Ready for duty.
  12. cjtroutt

    Am I on the right track with this engine build?

    Let me no about the WMO I never heard that in any TM Or ETM. I know if you try to Use WMO in the M915A3 in Detroit Diesel The EC2 Injectors will blow out Tips & Trash the Engine. or mess up the lower copper seal & what an Payne that is to fix.
  13. cjtroutt

    Am I on the right track with this engine build?

    Thank you I used to run Strikers out Lewis to yack.& back. sent to be with 172nd striker recovery Hets in LSA Diamond back H2 & Mareze H4 darn Toyoda & bagdad circle. Oif 2 /04-06
  14. cjtroutt

    Am I on the right track with this engine build?

    I was 88 Mike 233rd TC tasked to 142nd CSB. Dale do you still have acc to ETM. to find out all updates.
  15. cjtroutt

    Am I on the right track with this engine build?

    Dale is evergreen auto eletric still open there in fife on PCH 1. just north of you. Thank you.
  16. cjtroutt

    Am I on the right track with this engine build?

    I know JP8 was alot dryer Than DF2 had my IP gone throught so I can burn this poo that they call diesel fuel usdl.
  17. cjtroutt

    M1008 Recovery - Warner-Robins

    sounds good.
  18. cjtroutt

    dual 1400 20s

    Dual 1400 x20 would look cool.
  19. cjtroutt

    dual 1400 20s

    Mikeroot2 how the radiator.
  20. cjtroutt

    M915A1 Super Singles

    Looks Great well thought over.
Top